Condensate drain Study guides, Class notes & Summaries

3rd class stationary steam engineer license prep Questions and Answers 100% Pass _________ are necessary for complete combustion - Correct Answer ️️ -time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ - Correct Answer ️️ -214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi - Correct Answer ️️ -12 an oil cooler is commonly used with ...

which of the following can inspect welds on steel I beams in a commercial structure: A. Building inspector B. Contractor C. Designed professional engineer D. Jose the weld - C See GS160D-1106 Outdoor heated pool covers shall be provided with a ________? - Class 1 vapor retardant cover Energy Code R403.10.3 In a residence, Total duct leakage shall be less than or equal to __ cfm per 100 sq/ft of conditioned floor area served by that system - 5 Energy Code R403.3.3.1 In a residence, Hea...

Texas Mold Remediation Contractor State Exam 2024 Already Passed What does IICRC stand for? Institute of Inspection Cleaning and Restoration Certification What are the 5 principles of Mold Remediation? 1. Safety and Health Workers and Occupants 2. Document the Conditions and Work Processes 3. Control the Contaminate at is Source 4. Physically Remove the Contamination(Source Removal) 5. Correct the Moisture Problem to Prevent Recontamination What does SBS stand for? Sick Building...

The weight of water vapor in a given amount of air (Grains per cubic foot) - Answer-Absolute Humidity Pressure measured with a base of zero - Answer-Absolute Pressure A temperature scale using absolute zero as a reference - Rankin or Kelvin Scale (may be measures in degrees C or F) - Answer-Absolute Temperature Theoretical temperature at which all molecular activity ceases = -273.16 C or -456.69 F - AnswerAbsolute Zero By approximately how much (%) does a start capacitor increase motor tor...

more restrictive provisions apply - where conflicts occur between code and manufacture instructions. what shall be 3rd party certified as conforming to NSF 14 - all plastic pipe, fittings and components. all strainer plates on drain inlets shall be designed and installed so that all openings are..? - not greater than 1/2 inch (12.7) in least dimension. pipes through foundation walls need..? - a relieving arch or a pipe sleeve which is 2 pipe sized bigger. waterproofing joints at the ...

3rd class stationary steam engineer license prep Questions and Answers 100% Pass _________ are necessary for complete combustion - Correct Answer ️️ -time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ - Correct Answer ️️ -214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi - Correct Answer ️️ -12 an oil cooler is commonly used with ...

Refrigeration 2 ESCO Test Questions and Answers 100% Solved liquid slugging is what ️️liquid refrigerant in the compressor clearance space a customer complains that their air conditioning system is running constantly but not cooling enough. the suction line is very cold and the compressor is sweating. the most likely cause is what ️️a restriction of the return air or a dirty evaporator the clearance space in a reciprocating compressor ️️has no effect on compressor capacity ...

NATE Air Conditioning and Heat Pump Exam Questions and Answers Updated (GRADED A+) Which of the following factors affects a customers level of comfort? - ANSWER-All of the above A cooling load calculation estimates the sensible heat gain of the structure. The coolingonly system should be within _____% of this calculated value. - ANSWER-+15% The maximum sensible cooling capacity of a heat pump should be within ______% of the calculated sensible heat gain of a structure with a large heating l...

A solution used as a secondary refrigerant in chillers consisting of water and a chemical which lowers the water's freezing point is called: - Brine. Air-conditioning tube-and-fin coils are commonly available as: - Slab coils, slant coils, "A" coils, and "N" coils. An evaporator in which refrigerant enters as a saturated liquid vapor mix and leaves as a superheated vapor is a: - Direct expansion evaporator. An evaporator that covers the coils being cooled with liquid refrigerant is a:...

ABSA: 4th Class Part B - Comprehensive Exam 4 (150 Multiple Choice, 4th Class Part B , Units 1-12) Questions With 100% Correct Answers. One of the legal responsibilities of the engineer during an inspection is: Select one: a. To notify the Workers Compensation Board of the inspection b. Point out any known or suspected defects to the inspector c. To have at least two staff members present at all times d. To be in possession of an inspection certificate b The _____ tubes of a fired ho...