Nicet - Study guides, Class notes & Summaries

When using a pulse load tester on a sealed lead acid battery, the minimum acceptable capacity is... Answer - 80% When a software change is made to a fire alarm system, what percentage of the initiating devices not affected by the change must be tested Answer - 10% When testing elevator recall, the elevator should go to the alternate level when: Answer - The lobby smoke detector on the recall level is activated Minimum requirement for system documentation Answer - Battery calculations/fl...

Nicet Level 1 - Water Based Layout Questions and Answers Graded A+ Toggle hangers shall be permitted only for the support of pipe __________ inches or smaller in size under ceilings of hollow tile or metal lath and plaster. 1 2/2 in. (ref. NFPA 13 2016 Sec. 9.2.1.1.2. While conducting a flow test, the chosen hydrant should be ______ As close to the property where the sprinkler system is being installed. (Ref, NFPA 13 Sec. A.24.2.2. or NFPA 291) What formula is used to determine the discharge ...

NICET Level 1 inspection and Testing Exam 2024 When using a pulse load tester on a sealed lead acid battery, the minimum acceptable capacity is... -Answer-80% When a software change is made to a fire alarm system, what percentage of the initiating devices not affected by the change must be tested -Answer-10% When testing elevator recall, the elevator should go to the alternate level when: -Answer-The lobby smoke detector on the recall level is activated Minimum requirement for system docu...

NICET Level 2 ITM of Water Based Systems Questions and Answers 100% Pass When placing a LOTO on a system, how many locks should be applied? As many locks as their are personnel working on the system. A ladder must be able to support ____ times the weight of the expected load 3.3 It is acceptable to enter into a confined space without an attendant, but only if all other precautions and PPE are taken. False A defective air pressure gauge on the supply air of a dry pipe system is considered a __...

When placing a LOTO on a system, how many locks should be applied? - As many locks as their are personnel working on the system. A ladder must be able to support ____ times the weight of the expected load - 3.3 It is acceptable to enter into a confined space without an attendant, but only if all other precautions and PPE are taken. - False A defective air pressure gauge on the supply air of a dry pipe system is considered a _____ - Critical deficiency When taking a sprinkler system out of...

NICET Fire Alarm Level 1 Exam Questions and Answers (Latest Update 2023)

What is Bulk Density used for? (c29) - Answer Determining Mass/volume relationship for conversions in purchase agreements What is the dimensions of plate glass? (C29) - Answer 1/4" thick and at least 1" larger than the diameter of the measure What are the requirements for a thermometer? (C1064) - Answer has a range of at least 30-120°F and readable to the nearest 1°F When drying aggregate to constant mass, What should the temperature of the oven be? (C29) - Answer 230°F (+/...

if a combination audible/visible appliances are installed, the location of the installed appliance shall be determined by the requirements of Answer - the visible appliance what is the maximum number of 12-gaugeTHHN conductors that can be installed in 1-inch EMT Answer - 26 Do you resistors are connected in parallel. R1 = 300 Ohms, R2 = 300 Ohms. What is the equivalent resistance? Answer - 150 Ohms I room is 200 feet long and 100 feet wide, and the 8 foot high ceiling is smooth and flat...