Roofing - Study guides, Class notes & Summaries

NASCLA Exam Questions With 100% Correct Answers lightweight, 5/8" that is up to 15% lighter than standard Type X wallboard - answerGysum Panel- Firecode Type X What is an advantage of veneer plasters? - answerVeneer plaster is more durable Least expensive stud for gypsum framing? - answer25 gauge steel studs 18 GAUGE TIES are used for what in gypsum framing? - answerTO ATTACH CHANNEL TO FURRED AREAS Why USE SHORTER SHANK NAILS in framing with Gypsum? - answerTO PREVENT NAIL POPS With g...

Contractor's License Exam Questions and Answers 100% Pass Attachments to structural members The edges of lugs brackets, rivets and bolt heads attached to structural members shall be permitted to extend to within 1 inch of the surface of the fire protection Parapet construction The height of the parapet shall not be less than 30 inches above the point where the roof surface and the wall intersect. Combustible framing in fire walls Adjacent combustible members entering into a concret...

SOLVED- ELABORATED-CMCA Practice Test Questions 2022 SOLVED- ELABORATED-CMCA Practice Test Questions 20221. Which of the following is a common management control for ensuring maintenance work is performed in a timely manner? A. A purchase order system B. An equipment warranties C. A work order/response form D. A contractor's invoice C. A work order/response form - A, B, and D speak to elements OTHER than a control to ensure maintenance work is completed. - 2. The primary management control tool...

C-30 Roofing Trade Practice Test 5 Practice questions for the CSLB C-39 Roofing Exam Questions With Complete Solutions

C-39 Roofing Trade Practice Test Questions and Correct Answers A roof is 80' x 64' and one pallet has 6.45 squares of material. How many pallets are needed? - Correct Answer: 8 pallets

According to NRCA roofing manual: steep-slope roof systems, what is recommended nail spacing to fasten battens to the deck? - Answer 12" According to OSHA, a toeboard shall be required along the edge of platforms more than ______ above lower levels for a distance sufficient to protect employees below. - Answer 10 feet What is the recommenced weight for copper standing seams roofs with widths between seams of excess of 20"? - Answer 20 oz The NRCA recommends that polyvinyl chlori...

How many eaves does a gable roof have ? - Answer 2 How many rakes does a gable roof have ? - Answer 4 Does a hip roof have any rakes ? - Answer No How many hips does a hipped roof have ? - Answer 4 How many eves are on a hipped roof? - Answer 4 Eave - Answer A projecting edge of a roof that extends beyond the supporting wall. Rake - Answer The sloped edge fo a gable roof Hip - Answer The inclined external angle of formed by the two sloping sides of a hip roof...

According to the architectural sheet metal manual, what is the minimum thickness of a 4" x 6" plain rectangular copper downspout? - Answer 16 Oz When using step or channel flashing where a tile roof area intersects a side wall, NRCA recommends extending the flashing a minimum of ______ up the wall. - Answer 4" inch When installing EPDM waterproofing, lay the membrane on the substrate or flat surface and allow it to relax for a minimum of ______ before use - Answer 30 minutes Wh...

A roof is 30' x 40'. If you need 1 square for the starter, 1 square for waste, and 1 2/3 square for hip and ridge, how much roofing material will you need? - 16 squares A roof is 80' x 64' and one pallet has 6.45 squares of material. How many pallets are needed? - 8 pallets A roof with a slope of 8:12 is considered what pitch? - 1/3 A roofing contractor discovers damage done by other trades to a newly installed roof. What should the roofing contractor do? - Submit a written report to t...