310t - Study guides, Class notes & Summaries

C of Q 310T PREP QUESTIONS WITH COMPLETE SOLUTIONS.

C of Q 310T PREP QUESTIONS WITH 100% CORRECT ANSWERS!!

310T Practice Exam 2 Questions and Answers Graded A+ Which of the following tools can be used to cut new external threads?! A die A thread pitch gauge A tap A thread chaser A die During a PM inspection a broken radiator fan shroud is noticed. Which of the following could cause this damage?! Loose fan belts A failed fan hub clutch A broken engine mount An out of balance fan assembly A broken engine mount During a PM inspection the steering wheel binds when turned. What could cause this c...

C of Q 310T Prep Questions and Answers Already Passed 1. What procedure should be followed before using a bench grinder? a) Dress stone and set rest with minimum clearance of 3 mm (1/8"). b) Dress stone and set rest with maximum clearance of 1.6 mm (1/16"). c) Set rest with minimum clearance of 3 mm (1/8") and dress stone. d) Set rest with maximum clearance of 1.6 mm (1/16") and dress stone. b) Dress stone and set rest with maximum clearance of 1.6 mm (1/16"). 2. What should be inspect...

Which of the following tools can be used to cut new external threads?! A die A thread pitch gauge A tap A thread chaser - ANSWER A die During a PM inspection a broken radiator fan shroud is noticed. Which of the following could cause this damage?! Loose fan belts A failed fan hub clutch A broken engine mount An out of balance fan assembly - ANSWER A broken engine mount During a PM inspection the steering wheel binds when turned. What could cause this condition?! Excessive...

C of Q 310T Prep Questions and Answers Already Passed 1. Which of the following clutch components is a driven member?! a. clutch cover b. clutch friction disc c. intermediate plate d. pressure plate b. clutch friction disc 2. Which of the following is not a part of the clutch cover assembly?! a. pressure spring b. release lever c. pressure plate d. adapter ring d. adapter ring 3. Which of the following clutch components is splined to the input shaft of the transmission?! a. clutch fric...

Geology 310T Exam 1 Questions and Answers Graded A The Earth is being - Altered by humans We call this influence - Anthropogenic Examples of anthropogenic influences Pollution, deforestation, urban heat islands, animal extinction, changing water flow, melting ice, ocean acidification Keeling Curve Graph that plots the ongoing change of CO2 concentration in Earth's atmosphere. It shows the life cycle of trees "breathing" in small squiggly oscillations. Keeling Curve is evidence for - Globa...

C of Q 310T Engine Prep Questions and Answers 100% Solved 1. Which of the following accurately describes engine displacement?! a. Total piston swept volume b. Mean effective pressure c. Peak horsepower d. Peak torque a. Total piston swept volume 2. Engine breathing in the two-stroke cycle is usually referred to as?! a. Inertial b. Scavenging c. Exhaust displacement b. Scavenging 3. The tendency of an object in motion to want to stay in motion is known as?! a. Kinetic energy b. Dynamic ...

CSUF GEOL 310T-09 Henderson Faults & Folds 100% Pass Stress A force that acts on rock to change its shape or volume Strain deformation of materials in response to stress Ductile materials that stretch without breaking Brittle Easily broken; not flexible Joints a fracture in rock along which there has been no movement Fault a fracture in rock across which there is movement Normal Fault A type of fault where the hanging wall slides downward; caused by tension in the crust Reverse Fault a ty...