Hexagonal nut - Study guides, Class notes & Summaries

Module 0103-15 Introductions to hand tools Questions and Answers 100% Pass Another name for a machinist's hammer is A. Ball-peen hammer B. Claw hammer C. Veneer hammer D. Sledgehammer - Answer- A. Ball-peen hammer A heavy-duty tool used to drive posts or other large stakes is a A. Mallet B. Sledgehammer C. Bell-faced hammer D. Ball-peen hammer - Answer- B. Sledgehammer The proper angle for the edges of a cold chisel is A. 90 degrees B. 60 degrees C. 45 degrees D. 30 degrees - Ans...

C 10 Electrical Exam Part V & VI & VII Exam Solved Questions With Revised Correct Detailed Answers Brand New Version !! 1. Which of the following is an acceptable marking method for the grounding conductor on a grounding-type receptacle? A) A white-colored round-headed terminal. B) A tag with 1/4-inch high letters. C) An orange dot. d) D) A green-colored hexagonal headed or shaped terminal screw or nut. - ANSWER NEC Section Section 406.9(B) permits Answer D as one...

NCCER Module 3 (Hand Tools) Questions and Answers Graded A another name for a machinist's hammer Ans ball-peen hammer a heavy-duty tool used to drive posts or other large stakes Ans sledge hammer the proper angle for the edge of a cold chisel Ans 60 degree angle A screw that comes to a relatively sharp point at the base of its drive socket Ans reed and prince number of sides of a hexagonal shape Ans six How is a spud wrench different from a pipe wrench Ans smooth jaws t...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 try square a fixed, 90-degree angle used mainly for woodworking hex key wrench an L-shaped, hexagonal steel bar ball peen hammer has a flat face for striking and a rounded face for peening (rounding off) metal and rivets flat bar usually 2 inches wide and 15 inches long and has a nail slot at the end to pull nails out from tightly enclosed areas carpenter's square shaped like an L, and is ...

Intro To Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Machinist's hammer Ball-peen hammer Sledgehammer A heavy duty tool used to drive posts or other large stakes is a ________ 60 degrees The proper angle for the edge of a cold chisel is ________ Robertson The square type of screw(pic) Reid and Prince What screw is relatively sharp point at the base of its drive socket? Six Hexagonal means how many sides Spud wrench has sm...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Another name for a machinist's hammer ball-peen hammer A heavy-duty took used to drive posts or other large stakes sledgehammer Proper angle for the edge of a cold chisel 60 degrees A type of screw shown (square in a circle) Robertson A screw that has a sharp point at the base of its drive socket Reed and Prince How many sides on a hexagonal shape Six In what way is a spud wrenc...

The alteration between object markers and barriers reflectors is to be what spacing? A. 50' B. 40' C. 30' D. 25' - ...ANSWER...25' Glare screen shall be designed using a _____ degree cut off angle of the paddle based on the tangent? A. 45 degree B. 30 degree C. 20 degree D. 10 degree - ...ANSWER...20 degree What is the portable barrier wall minimum flare rate for 65 mph zone? A. 12:1 B. 65:1 C. 19:1 D. 8:1 - ...ANSWER...19:1 What type of nut goes on hook and lo...

Another name for a machinist hammer is a - Answer-Ball-peen hammer A heavy duty tool used to drive post or other large stakes is a - Answer-Sledge hammer The proper angle for the edge of a cold chisel - Answer-60 degrees A Reed and Prince screw comes to a relatively sharp point at - Answer-the base of it's drive socket When an object is plumb it is - Answer-perfectly vertical One situation that can make a measurement with a laser inaccurate is - Answer-Measuring to a highly refle...

Module 0103-15 Introductions to hand tools Questions and Answers 100% Pass Another name for a machinist's hammer is A. Ball-peen hammer B. Claw hammer C. Veneer hammer D. Sledgehammer - Answer- A. Ball-peen hammer A heavy-duty tool used to drive posts or other large stakes is a A. Mallet B. Sledgehammer C. Bell-faced hammer D. Ball-peen hammer - Answer- B. Sledgehammer The proper angle for the edges of a cold chisel is A. 90 degrees B. 60 degrees C. 45 degrees D. 30 degrees - An...

What is the minimum rating required for a receptacle? - Answer 15 A A single receptacle connected to a 30-ampere branch circuit must generally have a rating not less than ------ amperes. - Answer 30 Amps If 15- and 20- ampere duplex receptacles are not marked with "CO/ALR" they are suitable for use with -------. - Answer Copper and copper-clad aluminum conductors only. Duplex receptacles are required to be installed so that the equipment grounding contact is oriented in what ...