Machining level 2 - Study guides, Class notes & Summaries

National Institute for Metalworking Skills NIMS Machining Level 2 Test Preparation To convert inches to millimeters, a machinist would use a constant of _________. - ANS: 25.4 The feed rate for converting a hole on a drill press should be __________ that of drilling. - ANS: 2 times The feed rate for reaming a hole on a drill press should be __________ that of drilling. - ANS: 1/8th The most accurate method of measuring an angle is a : - ANS: combination set Which type of head for a...

Process - Correct Answer-- A sequence of linked activities that is intended to achieve some result, such as producing a good or service for a customer within or outside the organization - Processes involve combinations of people, machines, tools, techniques, materials, and improvements in a defined series of steps or actions - Ex: machining, mixing, assembly, filling orders - Processes must be repeatable and measurable Process Management - Correct Answer-- Involves planning and administer...

MMET 181 - Exam 2 Questions and Answers | Latest Version | 2024/2025 | Rated A+ What is the primary function of a lathe in manufacturing? A lathe is primarily used for shaping materials by rotating the workpiece against cutting tools, allowing for precise machining of cylindrical parts. How does a gear's tooth profile affect its performance? The tooth profile of a gear affects its load distribution, efficiency, and noise level during operation, influencing overall gear performan...

Manufacturing has gone from artisans to assembly lines to automation, with a heavy emphasis today on robotics and computers. - Answer-True For Kaizen to work, employees must implement plans and company policy for product improvements without an opportunity to provide input. - Answer-False Which code is used in the same line with the T code? - Answer-M06 Rapid prototyping is usually referred to as: - Answer-Additive Which of the following best describes fixed costs? - Answer-A periodic cost...

1. To accept signals from the machine or process devices and to convert them into signals that can be used by the controller 2. To convert controller signals into external signals that are used to control the machine or process 3. a) A rack that is located away from the processor module near the field devices b) To minimize the amount of wiring required 4. By its address 5. Type refers to an input or output Slot refers to the phy...

Review Questions 1. The availability and cost of manufactured products are an important part of our cost of living and the real wealth of the nation. Thus, reducing the cost of producer and consumer goods improves the productivity while holding down inflation, thereby improving the general standard of living. 2. This is true if you consider that everyone who uses the output from a process, including all the intermediate steps, is a customer. The operator of the next process is the user an...

WorkKeys Curriculum Graphic Literacy Level 6 Quiz A test is being conducted on the turbine generator module (Location 10). What is the longest time a worker without hearing protection can stay in this module without exceeding the exposure time permitted? A. 10 minutes B. 15 minutes C. 30 minutes D. 110 minutes C. 30 minutes How many locations have permitted exposure times less than 1 hour without hearing protection? A. 1 B. 2 C. 3 D. 4 B. 2 What is the approximate curren...

Millwright Level 4 Final review Exam Questions And Answers A variable displacement pump is a pump that A. the volume of fluid can be altered per cycle B. the speed of the pump can be altered C. the pressure can be changed per revolution D. can pump only fire resistant oil A. The volume of fluid can be altered per cycle The TIRr taken, represents _________ of the actual offset misalignment A. one half B. the total C. twice D. the true amount C. Twice A chain with an ANSI code of 140...

WorkKeys Curriculum Graphic Literacy Level 6 Quiz A test is being conducted on the turbine generator module (Location 10). What is the longest time a worker without hearing protection can stay in this module without exceeding the exposure time permitted? A. 10 minutes B. 15 minutes C. 30 minutes D. 110 minutes C. 30 minutes How many locations have permitted exposure times less than 1 hour without hearing protection? A. 1 B. 2 C. 3 D. 4 B. 2 What is the approximate curren...