Drill hole method - Guides d'étude, Notes de cours & Résumés

you are about to loosen a fishplate bolt. which wrench would be least likely to slip? (Ans- a. 6 point box end wrench b. 12 point box end wrench c. open end wrench you are using a plumb line to check a rail for plumb. you find that at the top it measures 1" and at the bottom it measures 1 1/4". what does this tell you? (Ans- a. the top of the rail needs to go towards the center b. the top of the rail needs to go toward the wall c. the bottom of the rail needs to go toward the wall ...

NEIEP 200 Final Exam Questions & Answers Latest Updated 2024/2025 (100% VERIFIED) you are using a plumb line to check a rail for plumb. you find that at the top it measures 1" and at the bottom it measures 1 1/4". what does this tell you? (Ansa. the top of the rail needs to go towards the center b. the top of the rail needs to go toward the wall c. the bottom of the rail needs to go toward the wall you are plumbing rails on a high rise installation. what type of plumb line should you us...

CDPH Water Distribution Exam Questions and Answers Latest Update 2024/2025 (Graded 100%) What term is used when a water utility divides its total operating expenses into the total revenue? a.) Debt ratio b.) Operating ratio c.) Credit ratio d.) Coverage ratio b.) Operating ratio Under the requirements of the Safe Drinking Water Act, it is the duty of the water purveyor to deliver potable water of proper quality only as far as the: a.) Entry point of the distribution system b.) Customer'...

ATT Task 1 Week 1 Elaborated Exam Which material would not be used for a PCB? A. Cardboard , B. Fiberglass, C. Epoxy , D. Bakelite - CORRECT ANSWER-A. Cardboard On what type of circuit board would you most likely find an unsupported hole? - CORRECT ANSWER-A single sided PCB What material is most commonly used to form the traces on a PCB? - CORRECT ANSWER-Copper What is the copper conductor around a PCB drill hole usually called ? - CORRECT ANSWER-A pad Why should maximum solder conne...

Millwright Level 1 Exam Questions and Answers Latest Graded A+. On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER aluminum oxide A blotter is used on a grinding wheel to: - ANSWER protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at lea...

Which species of wood is considered to be standard when comparing other woods for use in aircraft structure? Sitka spruce What is the basic difference between plywood and laminated wood? The grain in each layer of laminated wood runs in the same direction. The grain in the layers of plywood runs at 90 or 45 degrees. Brainpower Read More Previous Play Next Rewind 10 seconds Move forward 10 seconds Unmute 0:00 / 0:00 Full screen What kind of glue is recommended for...

NEIEP 200 Final Exam Questions and Answers Updated 2024/2025 (100% VERIFIED) you are about to loosen a fishplate bolt. which wrench would be least likely to slip? (Ansa. 6 point box end wrench b. 12 point box end wrench c. open end wrench you are using a plumb line to check a rail for plumb. you find that at the top it measures 1" and at the bottom it measures 1 1/4". what does this tell you? (Ansa. the top of the rail needs to go towards the center b. the top of the rail needs to go ...

Production personnel use standard operating procedures to determine __________. The proper way to do a task GD&T __________. Allows certain tolerances on part features to be increased 1. Which type of feature is parallel to the surface being dimensioned? A. extension line B. dimension line C. dimension units D. leader line Dimension line 2. The three standard views of an object are __________. - front, left side, top - front, right side, bottom - top, front, rear - top, front, r...

Airframe ASA/Baker's School FAA Oral Questions Which species of wood is considered to be standard when comparing other woods for use in aircraft structure? - Answer ️️ -Sitka spruce What is the basic difference between plywood and laminated wood? - Answer ️️ -The grain in each layer of laminated wood runs in the same direction. The grain in the layers of plywood runs at 90 or 45 degrees. What kind of glue is recommended for making a repair to a wooden structure? - Answer ️️ - ...

1. You have been provided with an unfamiliar brand of solvent to clean a brake drum. What is the best source for determining whether or not it is safe to use? a. OSHA b. SDS c. Building supervisor d. Local safety committee Answer: SDS 2. 2. A ladder needs to be extended 20' from the ground floor to the next landing. How far from the wall should the base of the ladder be? a. 3' b. 4' c. 5' d. 6' Answer: C. 5' 3. 3. Which of the following procedures would you use to get into a pit t...