Samenvatting
Samenvatting process safety (2300WETPRS)
- Instelling
- Universiteit Antwerpen (UA)
This is a complete summary of everything handled in this course, including remarks from the lecturers and several examples explained
[Meer zien]Voorbeeld 4 van de 91 pagina's
Voorbeeld 4 van de 91 pagina's
In winkelwagenVoorbeeld van de inhoud
1Summary Process safety
Part 1 : Batch processing
Large scale batch equipment
- Generally, a larger version of lab scale equipment
o 1000L-6000L-10 000L vessel (bulk is underground)
▪ The larger the vessel, harder to get temperature control and more inefficient
stirring
▪ Larger than this are uncontrollable
o Manhole to add solids
o Stirrer
o Electronics to control the stirrer, temperature
o Complex glass design
o Heating/cooling jacket
- Less accessible then lab equipment
The batch reactor in general:
- Workhorse in the industry (fine and pharmaceutical
chemistry)
- 50L -> 10 m³
- Mostly overhead stirring
- Cooling/heating through jacket
- Different flangers (ports) for addition/removal of reagents,
probes …
- Manhole to add solids
- Bottom drain valve
o Slurry liquids with much solids in them can be
difficult to remove because of this
- Limited visibility
o Problem with crystallization reactions to see if they
have started yet
- Everything (charging, heating, mixing) takes longer
o Can affect the chemistry, safety,…
Centrifuge:
- Closed
o Easier for products which are vulnerable to oxidation (compared to lab scale)
- Different scales possible
- Mostly used in the fine scale and pharmaceutical industry
Pressure filter:
- Closed
o Easier for products which are vulnerable to oxidation (compared to lab scale)
Summary process safety Wout De Wachter
, 2
- Different scales
- Comparable to a glass filter
o Pressure is used instead of vacuum
- Stir is possible
Before you start : retrieving safety information
- First safety test is always a dry test
o Think, read, surf about the chemistry
o Before start doing things
- Use the SDS (safety data sheet) as a starting point
o Standardized format
o Not standardized content
▪ The information for the same compound may differ for different supplier
▪ Labelling and identification of hazards differ by country
▪ Use EU based SDS whenever possible
- Check the labeling (GHS pictograms)
o One label my cover wide range of properties
o Labelling may change over time !
▪ New legislation
▪ Ends up on the SVHC list (substances of verry high concern)
- Check other relevant data
o Boiling / melting point
o Reactivity, know incompatibilities : no data = not necessarily safe !
o Water reactivity !
▪ Quite often gives a lot of heat and or gasses ! → dangerous!
o How to deal with spill
o How to deal with fire
o Storage conditions
- Information may differ between suppliers
- Belgium : Acros website to start looking for an SDS
- Mind the correct naming of compounds
Summary process safety Wout De Wachter
, 3
- Check Bretherick’s handbook of reactive chemical hazards
o List of all reported reactivity incidents sorted by compound
- For compatibility data : start with the chemical reactivity worksheet (from aiche.org)
o Database of common chemicals
o Individual safety concerns given per compound
o Indication of compatibility in complex mixtures
Personal protective equipment
➔ For protection against external influences
Type of PPE needed:
- Legally defined
- May also be company dependent
In lab environment:
- Safety glasses
- Lab coat
- Gloves
o Not latex to prevent allergic reactions
o Preferably nitril gloves
- Always work in fume hood
- Sometime respiratory PPE may be needed
In plant:
- Safety glasses , face shield if needed
- Safety overall
- Gloves : more resistant types then the ones in a lab
o Also, possible specialty gloves (hot/cold work , anti-slip, anti-cut)
- Helmet
- Safety shoes
o impact
o antistatic (flamatory environment)
o splash resistance
- Respiratory protection according to need
o Dust
o Gas/vapor
o 2 types:
▪ Respirators / filtering equipment : full/half face mask
• Full face masks : difficulties with glasses as they will break the tight
seal
▪ Breathing apparatus : supply of fresh air from another source
- Hearing protection according to need
Summary process safety Wout De Wachter
, 4
Important factor when discussing respiratory protection equipment : assigned protection factor
(APF)
- Indicator for protection efficiency
- Higher = better
- = the amount of time you can multiply your expose with
o No protection : APF =1
o Respirator : APF =50
▪ You can work 50 times longer in an environment then without any
protection
- Legally defined
- Tight fit is verry important
o Beard, piercing etc. have an influence
Fire and explosion risks
heat
➔ Most serious industrial chemical incidents involve explosion and/or fire
➔ Fire is often a secondary effect but the most damaging
➔ Fire triangle applies for both dust and gas/vapor
o Removing any of these prevents the fire:
o Oxygen
▪ Inerting as preventive measure (N2 or Ar) as an atmosphere
o Ignition source = heat / energy
▪ Use certified spark-free instrumentation
▪ Avoid hot surfaces
o Fuel
▪ Flammable Solvents/dust with a flashpoint < 60°c
▪ Above certain threshold volume : rules apply
➔ Heat alone can be sufficient for ignition : product dependent auto ignition temperature
o When the compound is subjected to a temperature higher than its auto ignition
temperature, the compound will spontaneously ignite
o Is usually very high and not significant
o Care for hot surfaces is needed when working with low AIT compounds
o In plants, equipment specifically designed to avoid overheating (T1-T6)
▪ Indicates with each equipment what the maximum possible temperature is it
could reach (even when malfunctioning)
Summary process safety Wout De Wachter
Voordelen van het kopen van samenvattingen bij Stuvia op een rij:
√ Verzekerd van kwaliteit door reviews
Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!
Snel en makkelijk kopen
Je betaalt supersnel en eenmalig met iDeal, Bancontact of creditcard voor de samenvatting. Zonder lidmaatschap.
Focus op de essentie
Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!
Veelgestelde vragen
Wat krijg ik als ik dit document koop?
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Tevredenheidsgarantie: hoe werkt dat?
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Van wie koop ik deze samenvatting?
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper woutdewachter. Stuvia faciliteert de betaling aan de verkoper.
Zit ik meteen vast aan een abonnement?
Nee, je koopt alleen deze samenvatting voor €12,49. Je zit daarna nergens aan vast.
Is Stuvia te vertrouwen?
4,6 sterren op Google & Trustpilot (+1000 reviews)
Afgelopen 30 dagen zijn er 62890 samenvattingen verkocht
Opgericht in 2010, al 14 jaar dé plek om samenvattingen te kopen