100% tevredenheidsgarantie Direct beschikbaar na je betaling Lees online óf als PDF Geen vaste maandelijkse kosten
logo-home
EQS 307 Questions And Answers 2024 €10,36
In winkelwagen

Tentamen (uitwerkingen)

EQS 307 Questions And Answers 2024

 0 keer verkocht
  • Vak
  • Instelling

EQS 307 Questions And Answers 2024 FATIGUE: Which of the following would you most likely expect from the fatigue experiment, based on your knowledge of its error sources? - ANS-Shorter times to failure, compared to theory FATIGUE: Instead of A228 steel, one group used a different metal with a l...

[Meer zien]

Voorbeeld 1 van de 4  pagina's

  • 13 augustus 2024
  • 4
  • 2024/2025
  • Tentamen (uitwerkingen)
  • Vragen en antwoorden
avatar-seller
EQS 307 Questions And Answers 2024
FATIGUE: Which of the following would you most likely expect from the fatigue experiment, based on
your knowledge of its error sources? - ANS-✔✔Shorter times to failure, compared to theory



FATIGUE: Instead of A228 steel, one group used a different metal with a lower Young's modulus but the
same S-N curve. How will this affect their results? - ANS-✔✔Longer times to failure



FATIGUE: Would a similar fatigue experiment provide any useful insights into the performance of steel
cables holding up a suspension bridge? - ANS-✔✔Yes



FATIGUE: Which of the following is the most likely explanation for fatigue specimens failing at the jaws,
as opposed to the middle of the arc? - ANS-✔✔Misalignment in the jaws



FATIGUE: You discovered that the 2 inch radius of curvature specimen repeatedly fails at closer to 10
seconds, rather than the theoretical 40 seconds. Which of the following is NOT an explanation for this
behavior? - ANS-✔✔The radius of the music wire was smaller than expected



FATIGUE: After conducting 5 tests at the 2 inch radius of curvature, you decide to conduct another 5
tests at the same radius of curvature, but with the motor spinning in the opposite direction. Your results
differ between the two experiments. Which of the following do NOT explain these differences? - ANS-✔
✔The strain is dependent on the direction of rotation



FATIGUE: By fatigue testing alone the Young's modulus can be determined, but will be inaccurate. - ANS-
✔✔False



FATIGUE: One of the reasons we are unable to find the endurance limit for steel is because our
experiment exerts a mean compressive force, causing the specimen to not have an endurance limit. -
ANS-✔✔False

Dit zijn jouw voordelen als je samenvattingen koopt bij Stuvia:

Bewezen kwaliteit door reviews

Bewezen kwaliteit door reviews

Studenten hebben al meer dan 850.000 samenvattingen beoordeeld. Zo weet jij zeker dat je de beste keuze maakt!

In een paar klikken geregeld

In een paar klikken geregeld

Geen gedoe — betaal gewoon eenmalig met iDeal, Bancontact of creditcard en je bent klaar. Geen abonnement nodig.

Focus op de essentie

Focus op de essentie

Studenten maken samenvattingen voor studenten. Dat betekent: actuele inhoud waar jij écht wat aan hebt. Geen overbodige details!

Veelgestelde vragen

Wat krijg ik als ik dit document koop?

Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.

Tevredenheidsgarantie: hoe werkt dat?

Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.

Van wie koop ik deze samenvatting?

Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper Accurate. Stuvia faciliteert de betaling aan de verkoper.

Zit ik meteen vast aan een abonnement?

Nee, je koopt alleen deze samenvatting voor €10,36. Je zit daarna nergens aan vast.

Is Stuvia te vertrouwen?

4,6 sterren op Google & Trustpilot (+1000 reviews)

Afgelopen 30 dagen zijn er 63950 samenvattingen verkocht

Opgericht in 2010, al 15 jaar dé plek om samenvattingen te kopen

Start met verkopen

Laatst bekeken door jou


€10,36
  • (0)
In winkelwagen
Toegevoegd