MECP Masters Test Study Guide Questions & Answers 2024/2025
2 keer bekeken 0 keer verkocht
Vak
MECP Masters
Instelling
MECP Masters
MECP Masters Test Study Guide Questions & Answers 2024/2025
Cars in 1982 - ANSWERSAbout 500 wires
Cars in 1992 - ANSWERSAbout 2000 wires
Appropriate substitute for a relay in a low current DC switching application. - ANSWERSNPN Transistor
Time constant formula for capacitors. - ANSWER...
MECP Masters Test Study Guide
Questions & Answers 2024/2025
Cars in 1982 - ANSWERSAbout 500 wires
Cars in 1992 - ANSWERSAbout 2000 wires
Appropriate substitute for a relay in a low current DC switching application. - ANSWERSNPN Transistor
Time constant formula for capacitors. - ANSWERS1 TC = R x C (Resistance x Capacitance)
Can be placed on a relay to protect transistorized outputs on an ECU. - ANSWERSSilicon Diode (place in
parallel across the coil terminals)
In a NPN transistor, the direction of the arrow indicates. - ANSWERSThe N material
On the OBD-II diagnostic connector the supply B+ and ground are. - ANSWERSPin 4 is chassis ground and
pin 16 is B+
Character that represents an OBD-II network diagnostic trouble code. - ANSWERSU
MOSFETS - ANSWERSmetal oxide semiconductor field effect transistor
JFET - ANSWERSjunction field effect transistor
Logic gates - ANSWERSsemiconductor that allow the smallest of currents(voltages) to control much
larger voltages or currents
, The "AND" Gate - ANSWERSboth inputs much be True
The "OR" Gate - ANSWERSany one of the inputs can be True
The "NOT" Gate - ANSWERSsimply inverts the input
Over what conductor configuration is MOST 50 ePHY transmitted? - ANSWERSA Dual UTP of four wires
In an OBD-II complaint DTC what does the first character "U" represent? - ANSWERSA network related
code
OBD-II DTCs that do not trigger immediate MIL activation and deley as many as three drive cycles before
triggering an MIL are called soft codes. - ANSWERSFalse
In which pin locations of an SAE J1962 OBD-II connector are the HS CAN High and HS CAN Low diagnostic
bus wires found? - ANSWERSPins 6 and 14
What is the output result of the AND logic gate if input A equals 0 and input B equals 1 ? - ANSWERS0
MECP recommended practice of safely testing voltage using the one-handed rule is for circuit voltages
exceeding 50 volts. - ANSWERSTrue
What is the operating voltage of a LIN bus network? - ANSWERS12 volts
What is the recommended shielding gas used in wire-feed MIG welding when welding mild steel? -
ANSWERSC25
If using a table-mounted router with a 3/4'' bearing on a 1/2'' flush trim router bit to copy a template
shape what amount of oversize on the copied work piece will result from copying the original template
shape? - ANSWERS1/8''
Voordelen van het kopen van samenvattingen bij Stuvia op een rij:
√ Verzekerd van kwaliteit door reviews
Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!
Snel en makkelijk kopen
Je betaalt supersnel en eenmalig met iDeal, Bancontact of creditcard voor de samenvatting. Zonder lidmaatschap.
Focus op de essentie
Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!
Veelgestelde vragen
Wat krijg ik als ik dit document koop?
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Tevredenheidsgarantie: hoe werkt dat?
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Van wie koop ik deze samenvatting?
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper Bensuda. Stuvia faciliteert de betaling aan de verkoper.
Zit ik meteen vast aan een abonnement?
Nee, je koopt alleen deze samenvatting voor €7,98. Je zit daarna nergens aan vast.