Mech 3 Safety Test | (All Amatrol Compiled)

Lockout devices are typically attached with which of the following? A heavy lock or chain What does the acronym ECP mean? Energy Control Plan All electrical circuits should be deenergized before maintenance by __________ to prevent accidents. Using lockout procedures If an operator does not test equipment after it is locked out __________________. They should be retrained Which of the following is NOT one of the major factors of uncontrolled hazardous energy facilities recorded by the FACE program from ? Failure to verify that the energy source was completely energized before beginning work LOTO devices can prevent the release of which of the following during machine or equipment maintenance and repair? Hazardous energy When can another employee's lockout lock be removed? - When you have confirmed that the employee is not at the facility - When you have made al the reasonable efforts to inform the employee that his/her lock has been removed - When you have confirmed that the employee is aware of the locks removal before he/she resumes work (Only after all of the above have been done) A requirement of a lockout device is that to be removed, it must be substantial enough to withstand which of the following? Excessive force Companies are responsible for training employees on the ECP including the safe application, use, and attachment of energy controls. Is this statement TRUE or FALSE? True The best way to prevent injury is to disengage or power off all energy sources to the machine or equipment by using an approved LOTO procedure. Is this statement TRUE or FALSE? True Which of the following is NOT a requirement for warning tags? Easily removable Which of the following was designed to prevent employee injury caused from the unexpected start-up of machines or equipment, or the release of hazardous energy while servicing or maintenance is performed? Lockout/Tagout Standard Companies have the flexibility to develop the ECP and appropriate procedures that meet the needs of the workplace as long as the program and its procedures meet the OSHA standard. Is this statement TRUE or FALSE? True Who may remove a LOTO device after maintenance or repairs are complete? The person who secured the device LOTO devices may be reused for any other purpose. Is this statement TRUE or FALSE? False Which of the following situations do NOT require that you wear a hard hat? You're driving your car to a construction area Defective PPE must be_______ Discarded and replaced The purpose of PPE is to protect you from injury by creating a barrier against workplace hazards. Is this statement TRUE or FALSE? True PPE can protect you from injuries caused by machines or dangerous chemicals. Is this statement TRUE or FALSE? True Self-adhesive tape can be used as an effective finger guard. Is this statement TRUE or FALSE? True Which of the following is evaluated in a hazard assesment? Impact, light, and radiation hazards To protect the eyes from infrared light and other intense radiant light, welders must use_______ Welding helmet _________ should be reviewed on a regular basis. Job safety analyses People working together discussing issues and making decisions are key elements of a ___________. Successful work group Until corrective action is taken, safety concerns should be __________. Tracked and reported Safety regulations created by state agencies do not need to be as effective as those created by OSHA. Is this statement TRUE or FALSE? False Workplace safety policies can prevent injuries that could prevent you from returning to work permanently. Is this statement TRUE or FALSE? True The emergency response team should be notified immediately if you observe a(n) ___________________. Hazardous material spill Many products cannot be disposed of using a trash compactor before sending to a landfill. These include: fluorescent light bulbs, spray cans containing all or some of products, and ________________. Liquid dyes Practicing unsafe behavior does not impact anyone besides you. Is this statement TRUE of FALSE? False A mechanical interlock _____________________ prevent(s) a machine's operation when the guard is out of place. Physically Safety is defined as a behavior that prevents hurt, injury, or loss. Is this statement TRUE or FALSE? True There are many types of Personal Protective Equipment, including ear, eye, and head protection. In this statement TRUE or FALSE? True A worker should immediately lockout a machine if he or she finds the _____________. Guard has been bypassed