WGU C172 (c172)

What type of engine does the C172 have? correct answer: L: Lycoming H: Horizontally opposed A: Aired cooled N: Normally aspirated D: Direct drive -4 cylinder -360 cubic inch -180 HP @ 2700 RPM -2 magnetos on the back of the engine, which provides 8 spark plugs (2 per cylinder) -Oil quantity: 6-8 quarts Airframe correct answer: -All metal -Four-place -single engine -equipped with tricycle gear and is designed for general utility and training purposes -Semimonocoque (substructure...

TCP/IP correct answer: Known as Transmission Control Protocol/internet protocol and is a set of protocols used to connect network devices to each other Application Layer (TCP/IP) correct answer: TCP/IP layer that is responsible for the communication protocols between nodes, such as HTTP, SSH, and NTP Transport Layer (TCP/IP) correct answer: TCP/IP layer that is responsible for the end-to-end transport of data, such as TCP and UDP Network Layer (TCP/IP) correct answer: TCP/IP layer t...

c172 WGU QUESTIONS AND ANSWERS

TCP/IP (Transmission Control Protocol/Internet Protocol) correct answer: A set of protocols made up of four layers (Application, Transport, Network, Network Interface Layer) used to connect network devices to each other Network Interface Layer (TCP/IP) correct answer: TCP/IP model layer that establishes how data should be physically sent through the network. Ethernet In conjunction with layers 1 PHYSICAL and 2 DATA LINK Network Layer (TCP/IP) correct answer: TCP/IP model layer ...

Which OSI layer is related to the function of the IP protocol suite? correct answer: Network Which OSI layer is responsible for organizing how bits are passed over the physical layer between devices within the same collision domain? correct answer: Data link Which OSI layer would define the scope of a protocol that makes sure packets of data are received correctly and resends them if they are not? correct answer: Transport Which protocol suite performs functions of OSI layer 4? corre...

PING correct answer: is one of the most basic tools for testing connectivity to other hosts. It sends an internet control message protocol (ICMP) echo request to a host and listens for the reply Traceroute/tracert correct answer: are used to trace the route an IP packet takes to a destination. It displays each hop (next router) in a numerical list with the hop's IP address and the time it takes to receive the packet. TRACEPATH correct answer: is similar to traceroute or tracert in that...

Engine Model correct answer: Lycoming 0-320-H2AD Engine Description correct answer: Normally aspirated. direct drive, air cooled, horizontally opposed, carburetor, four cylinder, 320 cu engine. Approved fuel grade correct answer: 100 or 100LL Standard Fuel Capacity correct answer: 43 gallons total, 40 usable Oil Capacity correct answer: 6 quarts Takeoff Weight Normal Category correct answer: 2300 lbs Takeoff Weight Utility Category correct answer: 2000 lbs Landing Wei...

What kind of airframe does the aircraft have correct answer: Semi-Monocoque Aluminum Structure How does the elevator, ailerons, and rudder work correct answer: Based on cables which run through a series of pulleys connected to a bell crank What type of flaps does the cessna have correct answer: single slotted flaps How do the flaps work on the cessna correct answer: They're operated by a electrical motor in right wing and allow for a steeper decent without increasing air speed N...

What is the subnet address for a packet that is sent to 174.118.17.95 with a subnet mask of 255.255.248.0? correct answer: 174.118.16.0 With an address of 197.15.22.31 and a subnet mask of 255.255.255.224, how many bits have been borrowed to create a subnet? correct answer: 3 Which 802.11 technologies use the 2.4Ghz spectrum? correct answer: 802.11n, g, & b What are the private address ranges for usable IP network addresses for Class B? correct answer: 10.x.x.x, 172.16-31.x.x, 192.1...

OSI Application Layer correct answer: Responsible for network applications and their product to be transferred OSI Physical Layer correct answer: This layer is responsible for the physical connections of the devices in the network. This layer is implemented through the use of devices such as hubs, repeaters, modem devices, and physical cabling OSI Data Link Layer correct answer: This layer is responsible for the error-free delivery of data to the receiving device or node. This layer is ...