Voltages - Study guides, Class notes & Summaries

The 2 main considerations concerning the existing cabling are? - correct answer Grandfathered system Abandoned cable 11-25 The type of cutover where cross-connects are relocated one pair after another until completed is called a - correct answer rolling cut 11-28 Which practice involves moving the customer to a temporary office space until their section of the retrofit is completed and then moving them back to their recabled office space? - correct answer Swing space phasing Whic...

Maintenance Tech 2-3 Conventional - NCTI In a hybrid fiber/coax HFC fiber optic node, what are common voltages produced by DC power supplies? - ANSWER-Common Voltage includes +5, +12 and +24 VDC Why do many optical nodes accept two independent power supplies? - ANSWER-For redundant Powering of the node. What is an option available on most optical nodes for connectin to the power supply? - ANSWER-Through a power cable that is connected from the power supply directly to the power port of t...

Which article of the NEC covers grounding? CORRECT ANSWER Article 250 What is a dropout plate? CORRECT ANSWER Metal plate with a curve surface for cable to follow as it passes from the tray All of the following are common service voltages in the United States Except: CORRECT ANSWER 372/575 3-Phase, 4-wire What does a GFCI breaker do? CORRECT ANSWER Opens a circuit to prevent operation of an electrical device What will happen when one or more coils in a winding are grounded? CORRECT A...

ATT Test 9 (Latest 2024/ 2025 Update) Questions and Verified Answers| 100% Correct| Grade A Q: What voltages are considered LOW (TTL logic)? Answer: 0.8 volts or less Q: What voltages are considered HIGH (TTL logic)? Answer: 2V or more Q: Voltages between 0.8V and 2V are considered what? Answer: Unknown, Float, Switching Q: How many different classes of IC integration are there? Answer: 5 Q: SSI is a class of integration with how many compon...

CWEA E/I Level 3 Questions and Answers 100% CorrectCWEA E/I Level 3 Questions and Answers 100% Correct If the potential difference across the coil is low, the coil will: A-draw too much current B-become too hot C-Produce too much magnetic force D-not heat up - ANSWER-D-not heat up The NEC identifies environments that contain flammable vapors and gases as which class of hazardous location? A-Class I B-Class II C-Class III D-Class IV - ANSWER-A-Class I Which of the following reduce...

NCCER Electrical Level 1 Mod 4 Electrical Theory Which of the following is true regarding a series circuit? The current flow is the same through all resistors. Which of the following is true regarding a parallel circuit? It has more than one path for current to flow. Which of the following is true regarding a series-parallel circuit? If a circuit is reduced to an equivalent series circuit, the total resistance is found by adding the loads. Two branches of a circuit (R1 and R2)...

B+, or supply voltages in electronics products, is considered to be: A. +5 to +12 VDC B. 0 to 30 V DC C. +12 to 300 V DC D. The anode or plate voltage supply correct answers D. The anode or plate voltage supply Leakage current in an electronic product, between either of the AC power cord conductors and the chassis or any exposed metals should not exceed _________. A. 5 microamps B. 500 microamps C. 5 milliamps D. 50 milliamps correct answers B. 500 microamps Shaded components ...

NETA level II exam questions & answers 2023 What is the preferred method of performing primary-injection testing on a low voltage circuit breaker with ground fault protection? Use of the manufacturer's test kit or rewiring the neutral CT input is the preferred method of primary-injection testing on a low voltage circuit breaker with ground fault protection, otherwise two poles can be connected in series to provide balanced secondary currents to the trip unit. At what current level does ...

When using a dynamic schedule and the energy profile in an hour is >250 MW and the actual hourly integration deviates from the hourly energy profile by ____ the tag must be modified. A. 100 MW B. 10% C. 50 MW D. 25% B. 10% Dry steam plants, flash steam plants, and binary cycle power plants are the three main types of what kind of generating plant? A. Nuclear generators B. Combustion turbine generators C. Geothermal generators D. Hydroelectric generators C. Geothermal generators...

Which of the following is true with regard to switchboards Switchboards are used to subdivide large blocks of power When installing wiring within switchgear, use self adhesive cable ties every ___. 12" (300mm) The maximum voltage that a piece of equipment can withstand is known as its ____. Basic impulse insulation level (BIL) Bolted pressure switches are often used in place of ___. Circuit breakers A transformer's temperature rise rating refers to ___. The max...