Epa 608 type 2 exam - Study guides, Class notes & Summaries

EPA 608 TYPE 2 TEST ACTUAL EXAM 210 QUESTIONS AND CORRECT DETAILED ANSWERS WITH RATIONALES (VERIFIED ANSWERS) |ALREADY GRADED A+

EPA 608 (Core, Type 1, Type 2, and Type 3) Exam Test Questions With Revised Correct Answers BEST UPDATED COMBINED SET!! The rupture disc is connected at the evaporator and is typically set to open at - ANSWER 15 PSIG The rupture disc is piped to the outdoors for venting - ANSWER ... When recharging a refridgeration system with CFC-11, 16.9 in. Hg. vacuum is necessary in the shells before charging with a liquid - ANSWER ... Under some conditions sight g...

EPA 608 TYPE 2 TEST ACTUAL EXAM 200 QUESTIONS AND CORRECT DETAILED ANSWERS WITH RATIONALES (VERIFIED ANSWERS) |ALREADY GRADED A+ EPA 608 TYPE 2 TEST ACTUAL EXAM 200 QUESTIONS AND CORRECT DETAILED ANSWERS WITH RATIONALES (VERIFIED ANSWERS) |ALREADY GRADED A+

EPA 608 (TYPE II) Type 2 Test Exam With correct Answers 2024 Questions and Answers 2024 / 2025 (Verified Answers by Expert)

EPA 608 Type 2 Exam With Latest Solutions 2024

If a leaking appliance with a regulated refrigerant is not going to be repaired, it must be; A retrofitted or retired within 3 months. B retrofitted or retired within 12 months. C replaced within 3 months. D replaced within 12 months. - Answer B retrofitted or retired within 12 months. A high-pressure appliance containing 210 lbs. of R-407C refrigerant must be evacuated (recovered) to a level of; A 15 inches of vacuum B 10 inches of vacuum C 4 inches of vacuum D 0 inches of vacuum ...

EPA 608 Type 2 Practice Exam 2024 Questions and Answers 2024 / 2025 (Verified Answers by Expert)

EPA 608 Type 2 certification Exam Questions with Verified Answers . When a new system has been assembled, the first thing to do is? Pressurize the system with an inert gas & leak check. After installation of a field-piped R-410A split heat pulp, the unit should first be? Pressurized with nitrogen then leak checked. The EPA regulations require that any appliances containing more than 50 pounds of refrigerant (except for commercial & industrial process refrigeration) must be repaired when ...

EPA 608 Type 2 certification Exam Questions With 100% Correct Answers (2024/2025) After the installation of any type of system, the unit should be pressurized with _____ and _____ checked. nitrogen leak Nitrogen is an ______ gas. inert In order to determine the general area of a leak, technicians should use a _____ or _____ leak detector. electronic ultrasonic After locating the general area of a leak, ______ ______ are used to pinpoint it. soap bubbles A refrigeration unit using an o...

EPA SECTION 608 CORE (2021-2022 revision) A disposable cylinder should be reduced to what pressure before scrapping? a. 0 psig b. 20 psig c. 50 psig d. 80 psig A major system repair is being performed on a R-22 appliance. What CANNOT be done to recharge the appliance? a. Add R-22 after the repair is complete. b. Retrofit the unit to R-407C. c. Use recovered or recycled R-22 from the same owner. d. Top off the unit with R-410a. A refillable cylinder must not be filled above what ...