Hydraulic term current Study guides, Class notes & Summaries

Which device do you use to measure voltage? - correct answer Multi Meter If you were asked to check out the I/O card on a plc, which card would you look at? - correct answer Input Card What does the term current refer to while dealing with electricity? - correct answer Amps On a hydraulic pump if you were told the pump is cavitating, what would you check for? - correct answer Low fluid in the tank In a 480 volt three phase system, what would your meter read if you went from one leg t...

Which device do you use to measure voltage? - Answer-Multi Meter If you were asked to check out the I/O card on a plc, which card would you look at? - Answer-Input Card What does the term current refer to while dealing with electricity? - Answer-Amps On a hydraulic pump if you were told the pump is cavitating, what would you check for? - Answer-Low fluid in the tank In a 480 volt three phase system, what would your meter read if you went from one leg to ground? - Answer-277 WHICH TOOL IS ...

Confined Space A space that: -is large enough to enter and work. -has limited or restricted means for entry. -is not designed for continuous occupancy. Hot Work Permit An employer's written authorization to perform work capable of providing a source of ignition. Inerting A form of purging or ventilating a confined space where an inert gas (such as nitrogen, carbon dioxide or argon) is used to displace the atmosphere in a confined space to remove fire or explosion hazards. Ca...

CWEA E1 Study Set with 100% Correct Questions and AnswersCWEA E1 Study Set with 100% Correct Questions and AnswersCWEA E1 Study Set with 100% Correct Questions and AnswersConfined Space - ANSWER-A space that: -is large enough to enter and work. -has limited or restricted means for entry. -is not designed for continuous occupancy. Hot Work Permit - ANSWER-An employer's written authorization to perform work capable of providing a source of ignition. Inerting - ANSWER-A form of purging or...

Confined Space - A space that: -is large enough to enter and work. -has limited or restricted means for entry. -is not designed for continuous occupancy. Hot Work Permit - An employer's written authorization to perform work capable of providing a source of ignition. Inerting - A form of purging or ventilating a confined space where an inert gas (such as nitrogen, carbon dioxide or argon) is used to displace the atmosphere in a confined space to remove fire or explosion hazards...

If you inhale phenolic fumes what would happen to you? - Trouble breathing A _________ fire extinguisher should be used on an electrical fire. - Class C What does OSHA stand for? - Occupational Safety & Health Administration This type of drawing represents a three-dimensional object using several two-dimensional views of the object. - Orthographic What are linear dimensions usually expressed in? - Decimal or Fractional Units What does a filled triangle represent in a fluid power d...

BECC MOD 7 When starting up the Hydraulic System, the ....... must be used. - correct answer EOSS Hydraulic systems are used to operate the ....... - correct answer STEERING GEAR If you apply 100 pounds of force to a 1 inch piston, the 2 inch output piston would have ....... pounds of force. - correct answer 200 Hydraulic system pressure is maintained by the ....... valve - correct answer UNLOADING Which component is used to convert fluid power energy to mechanical motion? - correct...

Describe the result of adding a large positive number and a smaller negative number. The result is a smaller positive number, and is the same as ignoring the signs and subtracting the smaller number from the larger. How do you convert a fraction into a decimal? Divide the top number (Numerator) by the bottom number (denominator). Brainpower Read More Previous Play Next Rewind 10 seconds Move forward 10 seconds Unmute 0:00 / 0:15 Full screen What is the key step that...

Stationary Engineering Exam Questions And Answers 100% Solved There must be adequate ___ across any steam trap for the condensate and/or air to be removed from the steam system. differential pressure When 200 lb of water is heated from 62°F to 75°F, ___ Btu is absorbed. 2600 A(n) ___ is used to reduce sulfur dioxide emissions. flue gas scrubber A ___ protects a Bourdon tube inside a pressure gauge from warping due to the high temperature of the steam. siphon loop A column of water ...

Driver Operator Pumper Questions with solutions NFPA 1901 Standard for Automotive Fire Apparatus 300 gallons NFPA 1901 states that pumpers must have a water capacity of at least Previous Play Next Rewind 10 seconds Move forward 10 seconds Unmute 0:01 / 0:15 Full screen Brainpower Read More Rescue pumper Specially designed apparatus that combines the functions of both a rescue vehicle and a fire department pumper CAFS High-energy foam generation system cons...