Idpx Study guides, Class notes & Summaries

The measurement of the distance between the most remote occupied point of an area or room to the entrance of the nearest exit that serves it. It is part of the exit access and measured in a straight line along the path of egress travel - Answer- In regards to means of egress, the travel distance is? a-The client's occupant area The amount a tenant pays for a leased space is determined by the rentable area. The rentable area is a product of the tenant's occupant area and a load factor to ...

With whom should the interior designer consult to determine where to locate the standing stacks in a library? A. mech engineer B. library planner C. structural engineer D. fire protection designer - Answer- C. The structural engineer In specifying new window coverings and tracks to replace building standard window coverings, what coordination is MOST important for the ID to undertake? (choose 4 that apply) A. Verify the building owner approves of the change in the building's exteri...

Which is NOT true about noise reduction between two rooms? A. Noise reduction increases with an increase in the transmission loss of the wall separating the two rooms. B. The stiffness of the wall can affect noise reduction. C. An increase in wall area separating the two rooms is detrimental. D. To improve noise reduction, the designer should place absorptive materials on both sides of the wall. - correct answer D Which of the following is an air distribution system in which supply air ...

Application for permit - Answer- What is the first step in the permit process? B. Specifying blueprint matched veneer wall panels instead of sequence matched. - Answer- All of the following are examples of value engineering except: A. Changing a spec from vinyl wallcovering to paint. B. Specifying blueprint matched veneer wall panels instead of sequence matched. C. Specifying vinyl upholstery instead of leather. D. Omitting custom booth seating and specifying stock tables and chairs...

NCIDQ – IDPX EXAM QUESTIONS WITH COMPLETE ANSWERS GRADED A+

Why does the HVAC system need to be balanced at the end of a commercial project? A. To verify that air quality levels are within the design specifications B. To detect significant air leaks in ductwork C. To adjust air flow at each device location to meet the criteria in the engineer's design D. To determine that each office is receiving the amount of outside air required by the design - Answer- The correct answer is C. Balancing the HVAC system is the process of measuring ai...

What is building commissioning? - correct answer The process of inspecting, testing, starting up, and adjusting building systems and then verifying that the systems are operating as intended and that they meet the design criteria. How does an independent furniture rep differ from a manufacturer's rep? - correct answer This type of furniture rep is self-employed and may represent more than one manufacturer. What type of schedule is this? It is a bunch of circles with numbers in it poin...

A: Door Schedule - Answer- Where would it be best to call out the frame material on an entry door? A. door schedule B. finish schedule C. hardware schedule D. finish plan A: 'I' should be used for interior design sheets when an architect's drawings are included as part of the drawing set 'I' is most commonly used when architectural drawings are also included in a drawing set, as a means to easily distinguish between architectural and interiors work. - Answer- When would be most ap...

The client is MOST typically involved with procurement of furniture through a. the acknowledgment b. freight bill c. a purchase order d. a sales agreement - correct answer d. a sales agreement The detail in the illustration is an example of a. architectural woodwork b. finish carpentry c. manufactured casework d. standard cabintry - correct answer a. architectural woodwork An interior designer recommends that a client purchase appliance directly rather than through a general ...