Mawp - Study guides, Class notes & Summaries

Nyc high pressure boiler license Exam Questions with Correct Answers The minimum blowdown for a spring loaded safety valve shall be of what percent of set pressure? - Answer-10% How is the main steam pressure gages tested? - Answer-With an inspectors gage Who is in charge of the code for any plumbing installations? - Answer-The nyc plumbing code When will anchorage or guides be inspected? - Answer-Annually How many brass washout plugs does a miniature boiler have? - Answer-3 brass wa...

Nyc high pressure boiler license exam with question and answers latest update The minimum blowdown for a spring loaded safety valve shall be of what percent of set pressure? - ANSWER>>10% How is the main steam pressure gages tested? - ANSWER>>With an inspectors gage Who is in charge of the code for any plumbing installations? - ANSWER>>The nyc plumbing code When will anchorage or guides be inspected? - ANSWER>>Annually How many brass washout plugs does a miniature b...

1/2" correct answers Sight Glass Minimum Connection 3/4" correct answers Low Water Cut-off Draw Minimum Connection 1" correct answers Water Column Minimum Connection 3/4" correct answers Control Manifold Minimum Connection 1/4" correct answers Sight Glass Drain Minimum Connection 1" correct answers Bottom Blow-Off Minimum Connection 2 1/2" correct answers Bottom Blow-Off Maximum Connection 2 1/2" correct answers Surface Blow-Down Maximum Connection 3" correct ans...

Boiler - Answer- Closed vessel in which water or other liquid is heated Power Boiler - Answer- Steam or vapor is generated <15psig High Pressure / Temperature Water Boiler - Answer- Pressures exceed 160 psig or Temp above 250 F Heating Boiler - Answer- Steam or vapor boiler operating under 15 psig not to exceed 250 F Portable Boiler - Answer- Temporary Location Usage: Construction Pressure Vessel - Answer- Vessel in which pressure is obtained from external sources ASME - Ans...

The minimum blowdown for a spring loaded safety valve shall be of what percent of set pressure? Correct Answer 10% How is the main steam pressure gages tested? Correct Answer With an inspectors gage Who is in charge of the code for any plumbing installations? Correct Answer The nyc plumbing code When will anchorage or guides be inspected? Correct Answer Annually How many brass washout plugs does a miniature boiler have? Correct Answer 3 brass washout plugs, 1" in size How often i...

What is the minimum pipe size of the gauge glass blowdown line? A. 3/8 inch B. 1/2 inch C. 3/4 inch D. 1 inch - Answer-A. 3/8 inch Only one bottom blowdown valve is required for boilers under A. 100ft^2 of heating surface B. 500 ft^2 of heating surface C. 100 psi MAWP D. 500 psi MAWP - Answer-C. 100 psi MAWP The type of safety valve allowed on boilers is the A. Weight and lever B. Thermostatic relief C. Spring-loaded pop D. All the above - Answer-C. Spring-loaded pop ...

What is the pressure at the base of a vertical foot of water? CORRECT ANSWER 0.433 psi How much should the boiler pressure increase when performing a hydrostatic test? CORRECT ANSWER 1.5 times the safety valve setting The range of a boiler steam pressure gauge. CORRECT ANSWER 1.5 to 2 times the safety valve setting Fuel oil heaters must be used when burning what? CORRECT ANSWER No. 6 fuel oil What is the maximum allowable working pressure of a low pressure steam boiler? (MAWP) CORREC...

Stationary Engineer License Exam Prep - Complete Solutions (Answered) The pressure sensitive device attached to a fan housing is called a a. pressuretrol b. aquastat c. thermostat d. vaporstat Draft is measured in a) ounces per square inch b) inches of water c) inches of mercury d) pounds per square inch Which of the following is used to measure temperature? a. fyrite analyzer b. vaporstat c. orsat analyzer d. pyrometer The main stop valve is located on the a) oil supply line b) condensate bre...

Power Engineering 4th Class unit B 3 chapter 1 Questions and answers well explained What is the minimum number of safety valves required on a boiler that has a heating surface of 42 m2? a. None b. One c. Two d. Three e. Four - ANS B The safety valves on a boiler and are set to open at 1380 kPa. What is the maximum permissible pressure rise in the boiler if it is fired at full capacity with the steam outlet valve closed? a. 0 kPa b. 37.5 kPa c. 41.4 kPa d. 69 kPa e. 82.8 kPa - A...

A low Pressure steam boiler has a MAWP of _____ psi CORRECT ANSWER-15 The higher the steam pressure, the higher the ___ of the water in the boiler. CORRECT ANSWER-boiling point ___ is the amount of energy equal to the evaporation of 34.5 lb of water/hr from and at a feedwater temp of 212F. CORRECT ANSWER-boiler horsepower When a steam boiler is operating at 100 pounds per square inch gauge pressure (psig), the temp of the water and steam will be approx. ___F. CORRECT ANSWER-338 A hor...