Annex D Question and answers already passed

Annex D
Where on the VSAT-L do you ground the MRT - correct answer ✔bare metal
inside EEU


Prior to connecting any active mission operations, it is recommended to do a
_______________, _______________________,, _________________ to
ensure all the components are operational - correct answer ✔PMCS, LTI,
Loopback


To console into the NCM on the AMRT, the website address you must use is -
correct answer ✔10.10.1.4 : 35000


What are the two ways you can console into the CBM-400/e modems utilizing
SecureCRT - correct answer ✔SSH2 and serial


When initially setting up your MRT, , and the MRT is zeroized, the user must
put the modem on _____________ when not using encryption - correct
answer ✔Bypass


You are attempting to console into CBM-400/e modems via SecureCRT for
the AMRT. For this session, you decide to use ssh2 as the protocol. The
hostname will be ________________ and the username will be
________________ - correct answer ✔10.10.1.4, root


When conducting a IF loopback, the -30 Attenuator adapter must be
connected on the ______ side of the IF loop Coaxial cable - correct answer
✔TX

, The CBM-400/e has the capability of __________ and ___________ - correct
answer ✔CIK and passphrase


What software do you utilize to create the encryption keys for the CBM-400/e -
correct answer ✔SecureCRT


What is the AMRT NMS GUI website - correct answer ✔10.10.1.4:30000


You are attempting to create a console session in SecureCRT for your CBM-
400 MRT modem. In order to do so, the session requires to select a COM
port. How do you find/know which COM port to utilize? - correct answer
✔Open device manager, unplug cable, whichever one disappears is COM
port


For a serial secureCRT session to console into a modem, what should the
baud rate be - correct answer ✔115200


Where do you connect the MRT into the VSAT-L - correct answer ✔Patch
panel on Rack 1


What is the protocol you are supposed to use when consoling into Secure FX
to extract bootfiles - correct answer ✔SCP


The terminal ID for the MRT is _________The terminal ID for the AMRT is
_________ - correct answer ✔MRT 0x120
AMRT 0x140


What is the address of website used to access the CBM-400/E GUI - correct
answer ✔10.10.1.3