TCFP Bundled Exams with Complete Solution | Verified Answers | 2024

To be able to locate information that applies to your duties, authority, and responsibility - Why is it important to be able to locate information in departmental documents and standard or code materials? Which NFPA standard specifies the minimum requirements for department safety and health progr...

What is the maximum distance to a type K extinguisher and what is the clearance from combustible material to the activator? - 30 feet distance from the extinguisher maximum and 18 inches required between the cooking, combustible material and the activator. What are the minimum measurements in hei...

Compared to full-size pumpers, initial attack fire apparatus have ? a. Larger Chassis b. smaller chassis c. larger agent tank size d. the same chassis and agent tank size - b When water converts to a gas, water vapor, or steam, the water: a. immediately dissipates so it is rarely visible b. c...

What normal body cooling mechanism is lost when wearing PPE? - evaporation of perspiration Which of the following statements regarding power saw safety is incorrect? - the saw should be started on level ground and carried up the ladder while running when a ladder is raised, it should be placed at...

A fire department has posted the following message in a prominent location: "The Smith City Fire Department is Committed to Professional Excellence Through a Tradition of Protecting Lives, Property, and the Environment by Providing the Highest Quality of Service in Prevention, Fire Protection, E...

the NFPA requires that, at minimum ppe clothing should be cleaned every _______ months a. 12 b. 6 c. 9 d. 14 - b. 6 National Fire Protection 1001 is ? A. Standard for firefighting professional qualifications B. Standard for Industrial Fire Brigades C. Standard for fire department occupationa...

In 1720 what was the piece of equipment to replace the bucket brigade? - Hand Pump Which NFPA standard required new fire apparatus to be designed so that all members riding on the fire apparatus would be provided a seated area inside an enclosed cab? - NFPA 1500 What was the first gasoline powere...

The plan or written document for tactical operations is known as a department's: - SOP/SOG Fire department standard operating procedures should be established in the MOST COMMONLY accepted order of fire ground priorities, which is? - Life safety, incident stabilization, and property conservation...

Substances or materials in quantities or forms that may pose an unreasonable risk to health, safety, or property when transported, stored, or used in commerce is a definition for a: - hazardous material When dealing with a radiological incident involving a leak or spill, what exposure guidelines s...

Which is a characteristic of smooth bore nozzles? A. Prone to clogging with debris B. Cannot be used to apply compressed air foam C. Cannot be adjusted to different stream patterns D. Operate at higher nozzle pressures than fog nozzles - C. Cannot be adjusted to different stream patterns How i...

Which of the following is a type of radiation? A. Omega B. Delta C. Alpha D. Theta - C. Alpha Which term refers to the concentration of a gas or vapor in air that will burn if provided with a source of ignition? A. Flash point B. Vaporization range C. Flammable range D. Combustible limit -...

NFPA 1001 is the - Standard for Firefighter Professional Qualifications One of the primary functions of the truck/ladder company is - performing forcible entry to fire scene buildings OSHA may establish regulations governing fire department activities such as - health and safety In the ICS, the ...

Is NFPA 921 a guide or a standard? - It is the Guide for Fire and Explosion Investigations What are the six steps of the scientific method? - Recognize the need Define the problem Collect the data Analyze the data Develop a hypothesis Test the hypothesis What step of the scientific method i...

Which duty is not the responsibility of a level I Inspector? A) Handle citizen complaints related to fire and life safety. B) Perform plans reviews. C) Interpret and apply adopted codes and standards. D) Determine occupancy loads for single-use buildings. - Perform plans reviews. Most of the co...