ASE G1 Test Questions and Correct Solutions 2024

ASE G1 Test Questions and Correct Solutions 2024 Technician A says that oil should be squirted into all of the cylinders before taking a compression test. Technician B says that if the compression greatly increases when some oil is squirted into the cylinders, it indicates defective or worn piston rings. Which technician is correct? - Answer -B only During a cylinder leakage (leak-down) test, air is noticed coming out of the oil fill opening. Technician A says that the oil filter may be clogged. Technician B says that the piston rings may be worn or defective. Which technician is correct? - Answer -B only Why should the customer concern be verified by the service technician? - Answer -Both b and c: To verify that the repair can be verified under the same conditions as when the concern was verified To make sure that a true problem exists What precautions are needed to be performed to help prevent air from getting trapped in the cooling system when replacing coolant? - Answer -Open bleeder valve(s) during filling An engine may need to have an air induction/ throttle body service performed if the engine is performing how? - Answer -Rough unstable idle/stalling Rust stains are seen around a universal joint. This usually ______________. - Answer -The joint has rusted and will normally require replacement Powertrain mounts are made with ______________. - Answer -Either a or b: Rubber Fluid Filled Why does drive shaft position need to be marked when they are removed? - Answer -To ensure proper phasing Air bag wiring connectors are what color? - Answer -Yellow Wear indicator ball joints indicate that they