100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
MPG Code Question Test 101-200 (1) CA$11.57   Add to cart

Exam (elaborations)

MPG Code Question Test 101-200 (1)

 1 view  0 purchase

MPG Code Question Test 101-200 (1)

Preview 2 out of 7  pages

  • July 18, 2024
  • 7
  • 2023/2024
  • Exam (elaborations)
  • Questions & answers
All documents for this subject (57)
avatar-seller
lydiaomutho
MPG Code Question Test 101-200
Outside grease interceptors shall require a ____________. - ANS-Chamber Vent

Swimming pools: pipes that contain waste water from wading and swimming pools, back wash
filters, scum gutter drains or floor drains around walk ways around pools shall be installed
___________________ - ANS-Through Indirect waste

A gasoline trap shall be provided with a _________ type of vent. - ANS-Chamber

Cleanouts shall be required at each change in direction; greater than or including
_______________ degree fitting. - ANS-45 degrees

The stand pipe for a domestic washing machine shall extend to a minimum height of _______
above the base of the machine. - ANS-30 inches

The chamber vent for an outside grease trap shall be piped to _____________. - ANS-The
inside of the building

Grease traps shall have a grease retention capacity of not less than _______ of grease for each
G.P.M. of flow. - ANS-2 lbs.

Cleanouts shall be required at the base of vertical storm water conductors, waste, or soil _____.
- ANS-Stacks

When the seating capacity for a stadium exceeds _______ people the number of toilets shall be
calculated at the rate of 1 per. 100 women and 1 per. 200 men. - ANS-2000

Vertical cast iron soil pipe shall be supported at the base of the stack and at __________. -
ANS-Each story height

Each shower head supply riser shall be _________. - ANS-Securely Attached

Vertical PVC or ABS stainless steel tubing and aluminum shall be supported at each story
height but not more than _________ intervals. - ANS-10 ft

Cleanouts shall be required every __________ on horizontal drain pipes 4 inches of less. -
ANS-50 ft

A dormitory shall have 1 laundry utility sink for each _________ persons. - ANS-50

, Accessible cleanouts shall be installed at each change in direction of the ___________. -
ANS-Building drain

The waste from a sacrium shall not be ____________. - ANS-Trapped or Vented

Which of the following plumbing fixtures would be permitted under Mass. State plumbing code?
- ANS-Wall hung water closet

Underground cleanouts shall be extended __________ finish grade. - ANS-To or above

When a cleanout on a building drains outside of the building the cleanout shall not be more than
________ from the building wall. - ANS-5 ft

Horizontal stainless steel 1 ½ inch or more shall be supported every __________. - ANS-10 ft

The minimum size for a chamber vent for an outside grease interceptor shall not be less than -
ANS-4 inches

Floor drains and gasoline traps are required in residential garages or more than _______ cars
when living units are above or below. - ANS-6

Horizontal copper tubing 1 ½ inch or more shall be supported every __________. - ANS-10 ft

A urinal for public use shall have non-absorbent material up to _______ above the floor. -
ANS-4 ft

A drain for a Laundromat shall be of sufficient size so as to receive simultaneous discharge of
__________ of all clothes washing machines. - ANS-75%

Each building trap when installed shall have a cleanout and a _____________. - ANS-Relieving
Vent

Horizontal CPVC plastic 1 inch or less shall be supported every _________. - ANS-3 ft

The waste from a domestic clothes washing machine shall discharge through a _______ into a
laundry utility sink or stand pipe. - ANS-Air break

An indirect waste discharging into a storm drain from a swimming pool shall be connected
through a _________. - ANS-Air Gap

Horizontal PVC or ABS plastic 2 inches or more shall be supported every _________. - ANS-4 ft

A toilet seat provided for public or semi-public use shall be _________ type. - ANS-Elongated,
open front with smooth non absorbent material

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller lydiaomutho. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for CA$11.57. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

67866 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
CA$11.57
  • (0)
  Add to cart