100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
MSSC MAINTENANCE AWARENESS EXAM WITH {243} QUESTIONS AND VERIFIED ANSWERS CA$16.63   Add to cart

Exam (elaborations)

MSSC MAINTENANCE AWARENESS EXAM WITH {243} QUESTIONS AND VERIFIED ANSWERS

 11 views  0 purchase
  • Course
  • MSSC MAINTENANCE AWARENESS
  • Institution
  • MSSC MAINTENANCE AWARENESS

MSSC MAINTENANCE AWARENESS EXAM WITH {243} QUESTIONS AND VERIFIED ANSWERS...

Preview 3 out of 29  pages

  • August 4, 2024
  • 29
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • MSSC MAINTENANCE AWARENESS
  • MSSC MAINTENANCE AWARENESS
avatar-seller
MSSC MAINTENANCE AWARENESS EXAM WITH {243}
QUESTIONS AND VERIFIED ANSWERS


Metals containing iron, such as steel, have _____________ characteristics. -
Answer: Magnetic

________________ metal is a metal with a comparable composition to the one
being connected. It reinforces the weld by filling the space formed between the two
pieces of metal while welding. - Answer filler


The gas metal arc welding (GMAW) procedure melts the metal wire and fuses it to
the base metal being welded. - Answer: electricity.


Iron-containing metals, such as mild steel, are referred to be ______ metals. -
Answer: ferrous.


A spot welding system is made up of an electrical supply, a moving arm, and a(n)
_____________. - ANSWER: stationary arm.


Metals treated with ____________ procedures soften. - ANSWER Annealing.


Oxy-acetylene welding requires no shielding and is not affected by wind or drafts,
unlike Gas Metallic Arc Welding or Gas Tungsten Arc Welding. - Answer:
electricity.


Metals containing iron, such as steel, are known as ____________ metals. -
Answer: ferrous.


A green welding hose indicates that it carries _________. - ANSWER: oxygen.

,Torches use ________________ to prevent oxygen and acetylene from mixing. -
Answer: Reverse-flow check valves at torch inlets or regulator outlets.


When ___________ comes into contact with oil, it can cause an explosion. -
ANSWER: High-pressure oxygen.


What defect does a Magnaflux test reveal in ferrous metal? - ANSWER Cracks in
the surface


When welding with the ____________, lean the electrode 15 to 25 degrees in the
direction of motion. - ANSWER Pull method


The maximum pressure for using acetylene gas is _____ psi. - Answer 15.

A red welding hose shows that it transports _________. - ANSWER: Acetylene


A(n) ___________ is a non-destructive test that employs a colored spray to
highlight flaws in a weld. - ANSWER dye penetration test


To avoid leakage around the valve during operation, _____________. - ANSWER
An oxygen cylinder valve should be opened completely.


What device should be kept at least 20 feet away from flammable materials? -
Answer: Oxygen cylinders.


Before installing an oxygen regulator, clear off any dirt or foreign material from the
cylinder. How should this be done? - ANSWER The cylinder valve should be split
open slightly before closing entirely.


The __________ is an electrical circuit component that allows the operator to
operate the system. - ANSWER input device.

, Electricity causes a flow of __________ in a conductor. - ANSWER electrons


consistent voltage power supplies keep a consistent voltage under different
conditions. - ANSWER loads.


A switch's principal function is to _________. - ANSWER: activate and
de-energize circuits.



A knife switch is made up of a lever and one or more sets of _________. -
ANSWER contacts



Circuit testers determine whether or not electricity is present. - ANSWER AC



Which of the following describes an electrical schematic diagram? - Answer: All of
the aforementioned.



The current that only runs in one direction is __________. - Answer DC



Which of the following is commonly used to start or halt machine operations? -
ANSWER: Pushbutton switch.



Which of the following represents an electrical output device? - Answer: All of the
above (motor, lamp, resistor).

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller luzlinkuz. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for CA$16.63. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

75323 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
CA$16.63
  • (0)
  Add to cart