NC Commercial Contractor Exam
Footing, underslab(as appropriate), foundation (wood frame), rough-in, building framing,
insulation, fire peotection, finals - ANS-Name the 8 general inspections
Shall be made after the trenches are excavated, all grade stakes are installed, all reinforcing
steel and supports are in place and tied, and all necessary forms are in place and braced and
before any concrete is placed - ANS-Footing Inspection
shall be made after all materials and equipment to be concealed by the concrete slab are
completed. - ANS-Under-slab inspection
shall be made after all foundation supports are installed - ANS-Foundation inspection, crawl
space
shall be made when all building framing and parts of the electrical, plumbing, fire protection, or
heating-ventilation or cooling system that will be hidden from view in the finished building have
been placed but before any wall, ceiling finish or building insulation is installed. - ANS-Rough-in
inspection
Shall be made after the roof(excluding permanent roof coverings), wall ceiling and floor flooring
is complete with appropriate blocking, bracing and fire stopping in place. Must be in place for
inspection: pipes, chimney and vents, flashing for roofs and chimney, insulation baffles, all lintels
if bolted to framing (if supported on masonry work may continue). - ANS-Building Framing
Inspection
Shall be made after an approved building framing and rough-in inspection and after the
permanent roof covering is installed, with all insulation and vapor retarders in place, but before
any wall or ceiling covering is applied. - ANS-Insulation inspection
Shall be made in all buildings where any material is used for fire protection. The permit holder or
his agent shall notify the inspection department after all fire protection materials are in place.
Fire protection materials shall not be concealed until inspection and approved by inspector. -
ANS-Fire Protection Inspection
Where the general statutes require, no permit shall be issued unless the construction
documents (drawings and specifications), bear the North Carolina seal of a registered design
professional. - ANS-Design Professional Seal Required
1) family residence up to 8 units attached with grade level exist, with no other buildings or
residents
2) building upon any farm that's doesn't substantially involve the health or safety of the public
Footing, underslab(as appropriate), foundation (wood frame), rough-in, building framing,
insulation, fire peotection, finals - ANS-Name the 8 general inspections
Shall be made after the trenches are excavated, all grade stakes are installed, all reinforcing
steel and supports are in place and tied, and all necessary forms are in place and braced and
before any concrete is placed - ANS-Footing Inspection
shall be made after all materials and equipment to be concealed by the concrete slab are
completed. - ANS-Under-slab inspection
shall be made after all foundation supports are installed - ANS-Foundation inspection, crawl
space
shall be made when all building framing and parts of the electrical, plumbing, fire protection, or
heating-ventilation or cooling system that will be hidden from view in the finished building have
been placed but before any wall, ceiling finish or building insulation is installed. - ANS-Rough-in
inspection
Shall be made after the roof(excluding permanent roof coverings), wall ceiling and floor flooring
is complete with appropriate blocking, bracing and fire stopping in place. Must be in place for
inspection: pipes, chimney and vents, flashing for roofs and chimney, insulation baffles, all lintels
if bolted to framing (if supported on masonry work may continue). - ANS-Building Framing
Inspection
Shall be made after an approved building framing and rough-in inspection and after the
permanent roof covering is installed, with all insulation and vapor retarders in place, but before
any wall or ceiling covering is applied. - ANS-Insulation inspection
Shall be made in all buildings where any material is used for fire protection. The permit holder or
his agent shall notify the inspection department after all fire protection materials are in place.
Fire protection materials shall not be concealed until inspection and approved by inspector. -
ANS-Fire Protection Inspection
Where the general statutes require, no permit shall be issued unless the construction
documents (drawings and specifications), bear the North Carolina seal of a registered design
professional. - ANS-Design Professional Seal Required
1) family residence up to 8 units attached with grade level exist, with no other buildings or
residents
2) building upon any farm that's doesn't substantially involve the health or safety of the public
