Exam (elaborations)
ASE BRAKES T4 PRACTICE TEST #1 QUESTIONS AND ANSWERS WITH SOLUTIONS 2024
- Course
- Institution
ASE BRAKES T4 PRACTICE TEST #1 QUESTIONS AND ANSWERS WITH SOLUTIONS 2024
[Show more]
Seller
Follow
Performance
Reviews received
Content preview
ASE BRAKES T4 PRACTICE TEST #1QUESTIONS AND ANSWERS WITH
SOLUTIONS 2024
Which of the following could cause the brakes on a truck to wear too fast?
A. Glazed Drums
B. Wrong linings installed
C. Low air pressure in the service tanks
D. Governor cut-out pressure too high - ANSWER Answer A is incorrect. Glazed drum linings are hard and
do not wear. They also do not stop the truck.
Answer B is correct. The wrong lining for the application may be the problem.
Answer C is incorrect. Low air pressure in the tanks would not cause brake wear. It may cause a low
amount of reserve air in case of multiple brake applications.
Answer D is incorrect. High governor cut=out pressure may cause the safety valve to open, but would
not cause the brakes to wear too fast.
Which of the following could case one brake on a truck to wear faster than the others?
A. Mismatched service brake chambers
B. Mismatched parking brake chambers
C. Low air pressure in the service tanks
D. Governor cut-out pressure too low - ANSWER Answer A is correct. Mismatched brake service
chambers would apply unequal brake application pressure from side to side, which would cause one
brake to wear faster.
Answer B is incorrect. Mismatched parking brake chambers would not cause brake wear. It would
possibly allow the brake to roll when parked, because one side could have insufficient parking brake
application.
Answer C is incorrect. Low air pressure in the tanks would not cause brake wear. It may cause a low
amount of reserve air in case of multiple brake applications
Answer D is incorrect. Low governor cut-out pressure may cause an inadequate amount of air in reserve
but would not cause the brake to wear too fast.
There is an audible air leak from under the dash when the foot valve is applied. Technician A says the
double-check valve may be faulty. Technician B says the single-check valve may be
,faulty. Who is correct? - ANSWER A. A only
B. B only
C. Both A and B
D. Neither A nor B
Answer A is correct. A leaking double check valve could allow air to flow to the foot valve and out the
open exhaust
Answer B is incorrect. Single check valves are used to protect the tanks. They do not cause an air leak
when the brakes are applied.
Answer C is incorrect. Technician B is incorrect.
Answer D is incorrect. Technician A is correct.
On a straight truck equipped with air brakes, the secondary tank pressure gauge falls to zero when she
wet air tank is drained. Technician A says the one-way check valve may be faulty.
Technician B says the foor valve may be faulty. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWER Answer A is correct. The one way check valve should protect the secondary
tank. The check valve is leaking.
Answer B is incorrect. The foot valve does not separate the wet and secondary tanks.
Answer C is incorrect. Technician B is incorrect.
Answer D is incorrect. Technician A is correct.
Which of the following could set an antilock braking system (ABS) wheel speed sensor code:
A. Faulty modulator hold solenoid
B. Faulty modulator release solenoid
C. Incorrect wheel bearing adjustment
D. Incorrect brake adjustment - ANSWER Answer A is incorrect. A faulty solenoid would not cause a
wheel speed sensor code. It could cause a modulator valve code.
Answer B is incorrect. A faulty solenoid would not cause a wheel speed sensor code. It could cause a
modulator valve code
, Answer C is correct. A loose wheel bearing adjustment can cause a faulty wheel speed sensor and a
wheel speed sensor code.
Answer D is incorrect. An incorrect brake adjustment may cause a dragging brake but would not cause a
wheel speed sensor code
The air drier purged too often. Technician A says the air drier delivery check valve may be leaking.
Technician B says a leaking wet tank could be the cause. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWER Answer A is incorrect. Technician B is also correct.
Answer B is incorrect. Technician A is also correct.
Answer C is correct. A leaking air drier check valve will allow the wet tank to drain back through the air
drier. This will cause air pressure to drop to governor cut-in rapidly. The air compressor will again build
tank pressure and unload, and the sequence will start over. A leaking wet tank will cause the air pressure
to fall rapidly and the compressor to build air again and then cut out. This too will cause the air drier to
purge often.
Answer D is incorrect. Both technicians are correct.
The safety valve releases on the air tank. Which of the following is the most likely cause?
A. Plugged line from the supply tank to the governor
B. Faulty tractor protection valve
C. Stuck spitter on the air drier
D. Faulty secondary tank - ANSWER Answer A is correct. If the line from the supply tank to the governor
were plugged the governor would not unload the compressor.
Answer B is incorrect. The tractor protection valve could not cause excessive pressure.
Answer C is incorrect. A stuck spitter would prevent the air drier from purging.
Answer D is incorrect. A faulty secondary tank could leak, but that would not cause excessive air
pressure.
A truck with hydraulic disc/drum brakes has a high firm pedal with poor stopping. Which of the following
could be the cause?
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Performance. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for CA$22.03. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
80562 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now