100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Previously searched by you
Previously searched by you
logo
TCEQ Class B Surface Water B test material -Exam with Questions and Correct Answers| Latest Update | Verified CA$20.32   Add to cart
Quickly navigate to
Preview
  2.  
  3. TCEQ Surface Water B
  4.  
  5. TCEQ Surface Water B

Exam (elaborations)

TCEQ Class B Surface Water B test material -Exam with Questions and Correct Answers| Latest Update | Verified

2 reviews
 37 views  1 purchase
  • Course
  • TCEQ Surface Water B
  • Institution
  • TCEQ Surface Water B

hat the 4 stages of the Chlorine Demand Curve chart? - Stage 1: No residual is formed because inorganic demand destroys the chlorine. (Flat Line) Stage 2: Monochloramines are formed as chlorine combines with organics containing ammonia (rising curve). The chlorine to ammonia weight ratio at this...

[Show more]

Preview 4 out of 38  pages

Document information

  • September 3, 2024
  • 38
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers

Subjects

  • tceq
  • turbidity
  • what causes turbidity
  • what is chlorine demand
  • tceq class b surface water b test material exam
  • tceq class b surface water b

Written for

  • TCEQ Surface Water B
  • TCEQ Surface Water B

2  reviews

review-writer-avatar

By: jg69hobbs • 1 week ago

review-writer-avatar

By: edwardchandler510 • 3 days ago

Seller

avatar-seller
Examsplug

Reviews received

Content preview

TCEQ Class B Surface Water B test material -Exam
with Questions and Correct Answers| Latest Update |
Verified
What is Turbidity? - ✔✔Turbidity can be described as a measure of the relative clarity
of water. Turbidity is an expression of the optical property that causes light to be
scattered and absorbed rather than transmitted in straight lines through the sample.



What causes Turbidity? - ✔✔Turbidity is caused by clay, slit, finely divided organic
and inorganic material. Other suspended matter and microscopic organisms can also
cause turbidity. There is one approved method for running turbidity - the Nephelometric
Method (NTU)



What is chlorine Demand? - ✔✔The amount of chlorine used up to completely react
with the water and its suspended or dissolve material



What is chlorine residual? - ✔✔When all the demand of the water is met any
additional chlorine produces a chlorine residual



What is chlorine dosage? - ✔✔Demand plus residual is the chlorine dosage. Chlorine
Dosage = Demand + Residual



What determines rate of disinfection? - ✔✔Chlorine concentration and contact time
determines the rate and degree of disinfection. If concentration increases, the time can
be reduced; if concentration is reduced the time must be increased.



How does temperature effect chlorine effectiveness? - ✔✔Chlorine effectiveness is
greater at higher temperatures, up to the point that chlorine volatizes. At low
temperature, chlorine is more stable, but disinfection time increases.

,Is removing turbidity important for disinfection? - ✔✔Turbidity must be removed to
low levels by sedimentation and filtration to allow chlorine to contact pathogens.



What happens to dissolved solids on contact with chlorine? - ✔✔Dissolved solids are
oxidized on contact further reinforcing the importance of contact time.


No residual is formed until reducing agents are destroyed. What are examples of
reducing agents? - ✔✔Manganese, iron, turbidity, organic matter, ammonia, or
nitrates



What the 4 stages of the Chlorine Demand Curve chart? - ✔✔Stage 1: No residual is
formed because inorganic demand destroys the chlorine. (Flat Line)


Stage 2: Monochloramines are formed as chlorine combines with organics containing
ammonia (rising curve). The chlorine to ammonia weight ratio at this point is 5:1.
Combined and total residual increases, chloro-organics are formed.


Stage 3: Increasing chlorine dosage (failing curve) to a chlorine/ammonia weight ratio of
7.6:1 destroys chloramines and chloro-organics. Combined decreases and free chlorine
increases.


Stage 4: Enough chlorine is added to reduce all demand. The combined residual remains
the same, but free residual increases with dosage. This stage is called "breakpoint"
chlorination. The chlorine to ammonia ratio of 10:1 satisfies all demand and disinfects
the distribution system. ( second rising curve)


What is the difference between free chlorine and combined chlorine
(chloramines/chlorine-ammonia) systems? - ✔✔Free chlorine is more powerful than
combined chlorine, but combined chlorine lasts longer.

,- combined chlorine requires a 60-minute detention time while free chlorine requires 10
minutes.
-If combined residual is replaced by a free residual, less taste and odor in the water
usuals occurs.
- if combined residual is used : ph and temperature must be monitored closely and the
residual adjusted accordingly. For example, as the temperature decreases the combines
residual must be increased. Free residual does not require such monitoring in the 6.0 -
8.0 pH range. Free chlorine residual concentration is not affected by temperature
changes.

What is the most important factor affecting the useful life of service lines? - ✔✔It is
the ability of the material to resist internal and external corrosion



When does Suction Head exist? - ✔✔Suction head exists when the source of supply is
above the centerline of the pump.



What is Net positive Suction Head (NPSH) - ✔✔NPSH is the pressure under which
water enters the eye of the impeller in a centrifugal pump. Insufficient NPSH is the main
cause of pump cavitation


Explain and expand on Chlorine Dioxide (what it reacts with, oxidizes, etc) -
✔✔Chlorine Dioxide is a gas used in small quantities to disinfect water. It does not
react with organics to form THMs and HAAs. It oxidizes phenols, manganese, iron,
sulfurous and organic compounds which aids in the removal of tastes and odors. It is a
very effective bactericide and a superior virocide. It dies not combine with ammonia.
Chlorine Dioxide MRDL is .8 mg/L and monitoring procedures are the same as for
chlorine. The Chlorite MCL is .q mg/L and must be monitored daily.



What is texas drinking water pH requirements? - ✔✔The texas drinking water
requirements require a pH > 7.0 for the water treatment plant finished water. EPA
requires that pH analysis be preformed within 15 minutes of the sample being caught.

, How does pH affect Chlorine activity? - ✔✔When chlorine is added to water it forms
hypochlorous acid (HOCL) and hydrochloric acid (OCL). The hypochlorous acid is the
effective disinfectant. At a pH of 4.0 there is 100% hypochlorous acid. At a pH of 11
there is 100% hypochlorite ion. At a pH of 7, the hypochlorous acid is at about 80% and
the hypochlorite ion makes up about 20% of the chlorine content. The lower the pH is
more effective chlorine is because you have more hypochlorous acid.



What is meant by water stability? - ✔✔Stable water is defined as water that will
neither deposit or dissolve a calcium carbonate film or scale. Since no water is stable
indefinitely, chemical treatment of water usually is intended to produce water that is
slightly scale forming without being liable to cause stoppages in small lines and services.
Bayliss curve is the simplest determination of stability. The Langelier saturation index is
also used.


What/how are above ground tanks and piping protected from corrosion? -
✔✔Corrosion protection for above ground tanks and piping is prevented by: cathodic
protection, use if protective linings/coatings, eliminating different types of metals in the
distribution system, and treating the water with chemicals to make it less corrosive



How do you tests fir alkalinity? - ✔✔The two tritiation methods of analysis are a
standard acid to titrate a sample. The end point of the titration is determined by the
following: an indicator that changes color at a certain pH, or potentiometric titration to
end - point pH. Using either of the methods, a measured amount of sample is titrated
with a standard sulfuric acid to a predetermined pH. Nomograph are a graphical form of
determining alkalinity. If the pH, total alkalinity, temperature and total dissolved solids
are known, any or all of the alkalinity forms may be estimated.




What is the minimum chlorine residual at the far reaches of the system for both free
and combined? - ✔✔Free chlorine residual = .2mg/L

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Examsplug. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for CA$20.32. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

77254 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
CA$20.32  1x  sold
  • (2)
  Add to cart