100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
ICC Soils 90 – 103 Questions and Answers Fully Solved CA$21.36   Add to cart

Exam (elaborations)

ICC Soils 90 – 103 Questions and Answers Fully Solved

 8 views  0 purchase
  • Course
  • Institution

ICC Soils 90 – 103 Questions and Answers Fully Solved For ASTM D478, the upper limit of oversize particles in this practice has been set at ____ of the plus No.4 material and ___ of the plus 3/4-inch material. 40% 30% The minimum required mass of soil for a moisture content test on a No...

[Show more]

Preview 1 out of 2  pages

  • September 7, 2024
  • 2
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
avatar-seller
ICC Soils 90 – 103 Questions and
Answers Fully Solved

For ASTM D478, the upper limit of oversize particles in this practice has been set at
____ of the plus No.4 material and ___ of the plus 3/4-inch material. - answer40%
30%

The minimum required mass of soil for a moisture content test on a No. 4 sieve shall be
___. - answer300gr

Water content of a specimen shall be reported to the nearest ___. - answer1%

The direct heating source for ASTM D4959 shall raise the specimen temperature to or
above ___°C or ___°F. - answer110
230

Balances for determining the moisture content of soil by direct heating shall have a
capacity of ___ and readable to ___. - answer2kg
0.1g

Material rolled into an 1/8-inch thread and left to air dry will crumble relatively easily if it
is predominantly ___ and harder to break if it is ___. - answerSilt
Clay

When performing a dilute HCI test, a mixture may consiste of __ hydrochloric acid and
___ water solution. - answer20%
80%

The excavatability classification table is based on the "ripping" ability of a ___ with a
single shank to break up the rock for removal. - answerD-9 dozer

When using the split barrel sampler to perform the Standard Penetration Test (SPT) the
total drops taken to drive the sampler the last 12 inches is considered the ___. -
answerN value

When performing a Standard Penetration Test (SPT) and the blow count or N value is 3,
that would be considered a relatively ___ material. - answerDense

If the blow count for any half-foot increment exceeds ___, the distance the sampler was
driven should be measured and recorded, then the split barrel sampler should be
removed from the hole to prevent damage to the driver shoe. - answer50

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller julianah420. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for CA$21.36. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

83637 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
CA$21.36
  • (0)
  Add to cart