Exam (elaborations)
EXTREME EXOS CAMPUS EXAM QUESTIONS WITH CORRECT ANSWERS
- Course
- Institution
EXTREME EXOS CAMPUS EXAM QUESTIONS WITH CORRECT ANSWERS
[Show more]
Seller
Follow
biggdreamer
Reviews received
Content preview
EXTREME EXOS CAMPUS EXAMQUESTIONS WITH CORRECT ANSWERS
Configure VLAN with IP Address - Answer-Configure vlan <name> ipaddress <ip>
Routing Interface - Answer-VLAN that has a configured IP Address
Are all Extreme Switches Routing Capable? - Answer-True
The routing table contains, - Answer-Dynamic and static routes
How to Configure A VLAN with an IP Address? - Answer-configure vlan <name>
ipaddress <ip>
Static Routes - Answer-Entered manually, persist through reboot, and are not
advertised through routing protocols.
Default Route - Answer-A static route that specifies the interface to which the router
forwards packets that do not match any other entry in the routing table.
How to configure a default route? - Answer-configure iproute add default <default
gateway>
How to configure a static route? - Answer-configure iproute add <ip> <nm> <def. gate>
Dynamic Route Types: - Answer-Router Information Protocol (RIP)
Open Shortest Path First (OSPF)
Intermediate System to Intermediate System (IS-IS)
Border Gateway Protocol (BGP)
ICMP Redirects from other routers
Routing Hierarchy - Answer-1. Longest matching network mask
2. Directly attached network interface
3. Static Route
4. ICMP redirect
5. Dynamic Route
6. Directly attached inactive network interface.
View Route Priority - Answer-sh iproute priority
To Change IP route priority - Answer-configure iproute priority <protocol> <priority>
Equal Cost Multi Path (ECMP) Configuration - Answer-Enable iproute sharing
configure iproute sharing max-gateway
,How does ECMP vary per model? - Answer-v22.1 and below - 4
v22.2 and above - 16
Verify the Routing Configuration - Answer-Show vlan
Viewing the routing table - Answer-show iproute
Verifying the IP config - Answer-show ipconfig
Edge License - Answer-IPv4 & IPv6 Unicast Routing Inc. Policy based Routing
BootP Relay
RIP v1/v2, RiPng (IPv6)
Advanced Edge - Answer-BGP Auto-Peering
OSPFv2-Edge & OSPFv3-Edge
PIM-SM-Edge
VRRP
Core License - Answer-OSPFv2 and OSPFv3
BGP3 and MBGP for IPv4 & IPv6
IS-IS for IPv4 & IPv6
PIM-DM
PIM-SM
PIM-SSM
MSDP
Link Aggregation Groups (LAGs) - Answer-Bonding together two or more ethernet ports
into a single virtual port that appears as a single, higher-bandwidth, logical link.
LAG Support - Answer-A link can only be allocated to one LAG at a time
LAG makes multiple links appear as one to STP
LAG is supported on Full-Duplex Ethernet ports
,Physical ports MUST be the same speed
LAG is supported on all Extreme Switches
LAG Configuration Limits (Summit and SummitStacks) - Answer-Static LAG/Health
Check LAG max ports - 8
LACP LAG = 16 (8 members/8 standby)
MAX number of LAGs = 128
LAG Configuration Limits (EXOS Switches) - Answer-X450/X460/X670 - G2s, X770
Static LAG/Health Check LAG max ports - 16
LACP LAG = 64 (32 members/32 standby)
MAX number of LAGs = 128
Dynamic Load Sharing (LACP) - Answer-LACP Dynamically adds or deletes ports to a
LAG based on its link partner state (creates and maintains configuration information for
LAGs)
Health Check Links - Answer-Used to monitor TCP/IP addresses and ports
When connectivity and the port fails, the member link is removed from the LAG.
Static Load Sharing - Answer-Grouping of ports which do not use LACP
Ports have to be manually added or deleted from a LAG
Creating a LAG - Answer-Enable sharing <port> grouping <port list>
Disabling a LAG - Answer-Disable sharing <port> grouping <port list>
LAG Command Qualifiers - Answer-#.. algorithm address-based (uses L2 by default,
L3, or L3_L4)
#.. algorithm port-based (the LAG will use the port-based algorithm)
#.. algorithm custom (LAG will use a custom algorithm)
#.. lacp (enables the LAG for LACP)
#.. health-check (enables tracking of a host IP/TCP port)
, Configuring the LAG Custom Algorithm - Answer-conf sharing address-based custom
ipv4 (configures custom load sharing algorithms for IPv4)
LAG custom algorithm command qualifiers - Answer-#.. L3-and-L4 (Src & Dest IP
addresses & ports)
#.. destination-only (Destination IP Address only)
#.. source-and-destination
#.. source-only (source IP address only)
Configuring a LAG Health Check - Answer-conf sharing health-check member-port
LAG health check command qualifier - Answer-#.. add track-tcp{(Track IP & TCP Port)
#.. tcp-port (TCP port Default=80)
#.. frequency (Default= 10 secs)
#.. miss } (number of misses before a connection loss is reported, default= 3)
Configuring a LAG custom Hashing Algorithm - Answer-conf sharing address-based
custom hash=algorithm
Custom Hashing Algorithm Command Qualifiers - Answer-#.. xor (uses XOR address
hashing)
#.. crc-16 (uses crc-16 address hashing)
#.. crc-32 lower (uses the lower 16 bits of CRC-32)
#.. crc-32 upper (uses the upper 16 bits of CRC-32)
Verifying LAG - Answer-show sharing
Verifying LACP - Answer-Show lacp lag 6
Multi-Switch Link Aggregation (MLAG) - Answer-Combines two or more ports to form a
single logical connection to two devices
MLAG Features - Answer-Dual homing
removes the need for L2 loop prevention
extends regular lag configs for L2 and L3
MLAG Limits - Answer-Peer switches must be of the same family
Can support for more than one MLAG peer
L2 protocols (EAPS/STP) will be configured to not allow the blocking of the ISC
Each switch should be on the same firmware.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller biggdreamer. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for CA$28.17. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
60281 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now