Gr 9 - Study guides, Class notes & Summaries

1- A hydrotest is being conducted on an underground line as a substitute for the external inspection. The test pressure is 200 psig. At the end of the test, the pressure must be at least: - C.190 psig 2- Determine the maximum allowed pressure for a class 300 flange that has a design temperature of 950 degrees F. The flange material is ASTM A217 gr.C12 - B. 375 psig 3- An 8 NPS pipe is being replaced with A106 gr. B material. The pipe retirement thickness is 0.218" and the corrosion allowa...

API 653 exam prep - Open Book ONLY Questions and Answers 100% Pass *When using the preheat alternative weld method, the temperature shall be checked ___ to assure the minimum temperature is maintained during welding. A) one inch or two times the material thickness whichever is greater, on each side of the groove. B) two inches or two times the material thickness, whichever is great, on each side of the groove C) Three inches or three times the material thickness, whichever is greater, in...

1- A hydrotest is being conducted on an underground line as a substitute for the external inspection. The test pressure is 200 psig. At the end of the test, the pressure must be at least: C.190 psig 2- Determine the maximum allowed pressure for a class 300 flange that has a design temperature of 950 degrees F. The flange material is ASTM A217 gr.C12 B. 375 psig 3- An 8 NPS pipe is being replaced with A106 gr. B material. The pipe retirement thickness is 0.218" and the corrosion allowance ...

API 653 EXAM PREP - OPEN BOOK ONLY ALREADY PASSED *When using the preheat alternative weld method, the temperature shall be checked ___ to assure the minimum temperature is maintained during welding. A) one inch or two times the material thickness whichever is greater, on each side of the groove. B) two inches or two times the material thickness, whichever is great, on each side of the groove C) Three inches or three times the material thickness, whichever is greater, in each side of t...

NUR 101 Math #2 Dosage Calculations “Unlike Units” Class Objective #2 : Use dimensional analysis ( cancel method) for calculating drug dosages in unlike units of measure. Sample Problem #1: Mrs. Smith is to receive 0.02 g of a drug. The label reads 40 mg/mL. How much would you give ? 0.5 mL Sample Problem #2: The physician ordered 1/8 gr Vistaril. You have on hand a 10 mL vial labeled 40 mg/mL. How much would you give? 0.19 mL Class Work 1. MD order: Demerol 0.025 g po q ...

5/3/19 ATI FUNDAMENTALS EXAM 1. CHAPTER 1: HEALTH CARE DELIVERY SYSTEMS A. Components of Health care systems a. Participants 1. Consumers- clients 2. Providers a. Licensed providers: registered nurses, license practical (or vocational) nurses (LPN), advanced practice nurses (APN), medical doctors, pharmacists, dentists, dietitians, physical/respiratory/occupational therapists, etc b. Unlicensed providers: assistive personal b. Settings 1. Hospitals, homes, skilled nursing, assisted living, schoo...

Microbiology Quiz 4 Lab 9 and 10 Latets Update Graded A+ What are Coliform bacteria? Gram negative non spore forming bacteria that are capable of fermenting lactose to produce acid and gas. What fecal coliform bacteria is used as an indicator species? E. coli. (If E. coli is present than this suggest that serious pathogens such as Salmonella and Campylobacter species are also present as well.) Does every food from the FDA get tested? No, unless an outbreak occurs What are the m...

convert :20 pounds 5 ounces to kilogram correct answer: 1st: need to convert 5 ounces to a fraction of a pound 5 divided by 16=0.31 2nd: 20.31 pounds divided by 2.2=9.23 kg Note: medication would be calculated based on 9.23 kilograms DO NOT ROUND TO 9.2 Pediatric specific Calculations correct answer: Mg / Kg dosing based on Weight (Kg) Safe dosing ranges IV pediatric infusion rates IV administration of meds via IV pump or Syringe pump. 24 hour fluid calculation child: 5 years: w...

API 570 Open Book Exam Questions and Answers 100% Pass A hydrotest is being conducted on an underground line as a substitute for the external inspection. The test pressure is 200 psig. At the end of the test, the pressure must be at least: - Answer- C.190 psig 2- Determine the maximum allowed pressure for a class 300 flange that has a design temperature of 950 degrees F. The flange material is ASTM A217 gr.C12 - Answer- B. 375 psig 3- An 8 NPS pipe is being replaced with A106 gr. B mater...

API 653 Certification - Practice Exam - Open Book Rated A+ An insert plate is required for a new 4 NPS nozzle (4.5" O.D.) in the shell. What is the minimum diameter for this insert? A. 4.5" B. 9" C. 12" D. 16.5" D. 16.5" A welder is qualified on a plate in the 3G position. The welder is qualified for what fillet weld position(s)? A. None B. F, H C. F, H, V D. All fillets C. F, H, V When must a shim be placed under an Image Quality Indicator? A. When the ...