Lateral loads - Study guides, Class notes & Summaries

What is the result if the neutral wire becomes open on a multiwire circuit having unequal loads? Select one: a. The load of higher resistance would overheat and probably be damaged. b. The load of lesser resistance would overheat and probably be damaged. c. No effect until one load is turned off or opens. d. No effect. The load of higher resistance would overheat and probably be damaged. Refer to Figure 128.202. ___ volts are applied across the water heater element. S...

Fire Officer I EXAM LATEST ACTUAL EXAM QUESTIONS AND ANSWERS (100% VERIFIED ANSWERS) | GRADED A+. What are the 5 types of building construction? - CORRECT ANSWER Type 1- fire resistive Type 2- non combustible Type 3- ordinary Type 4- heavy timber Type 5- wood frame -Type 1 and 2 are non combustible -Type 3, 4, and 5 are combustible Fire drills in schools - CORRECT ANSWER Done monthly, different times of day Rough drawing of building is called - CORRECT ANSWER Field sketch Microwave ...

Complete Solutions Manual for Applied Dynamics, 1st Edition by Haim Baruh ; ISBN13: 9780367373108. (Full Chapters included Chapter 1 to 15).... 1. Introductory Concepts. 2. Kinematics Fundamentals. 3. Kinematics Applications. 4. Kinetics Fundamentals. 5. Kinetics Applications. 6. Response of Dynamical Systems. 7. Response of Multi Degree of Freedom Systems. 8. Analytical Mechanics. 9. Three-Dimensional Kinematics of Rigid Bodies. 10. Mass Moments of Inertia. 11. Dynamics of Three-Dime...

Crown - The highest point of the curved edge of a framing member Dead Load - The weight of permanent, stationary construction and equipment included in a building Dome pan - Metal or fiberglass concrete form used for two-way joist system End Joist - The first and last joists in a floor system; they run parallel to the common joist Fire Stop - An approved material used to fill air passages in a frame to retard the spread of fire Floor Truss - An engineered assembly that is used to support f...

PPD Study Exam 4 Questions & Answers 2024/2025 Static Loads - ANSWERS1. Dead Loads 2. Live Loads 3. Foundation Loads 4. Impact (Kinetic Loads) Gravity Loads - ANSWERSInclude dead loads and live loads Dead Loads - ANSWERSself-weight of the structure and anything permanently attached to it Live Loads - ANSWERSmovable loads like people, slow, water and moving equipment Foundation Loads - ANSWERShorizontal force of soil mass or water pressure Impact (Kinetic Loads) - ANSWERSLo...

What is: Design wind pressure? Correct Answer-Design wind pressure: Minimum design value for the equivalent static pressure on the exterior surfaces resulting from critical wind velocity (equal to a reference wind wind pressure measured at 33', 10m). The # is modified by a bunch of coefficients to account for: exposure conditions, building height, wind gusts, geometry/orientation. Why are horizontal forces more critical than vertical ones in seismic design? Correct Answer-Because structure...

SE 103 Exam Question and answers already passed SE 103 Exam Which of the following is NOT true about a Pile Foundation? 1.) It is a long cylinder of a strong material such as concrete pushed into the ground to act as a steady support for structures built on top of it. 2.) It is capable of taking higher loads than spread footings. 3.) It is used when there is a deep layer of weak soil at the top of the surface. 4.) It is used for very heavy, concentrated loads, such as in a high rise stru...

OSHA 30/ 255 Quizzes & Answers/ . Terms like: _____________ must be designed, fabricated, erected, supported, braced, and maintained so that it will be capable of supporting without failure all vertical and lateral loads. - Answer: Formwork "Clean as you go" is a term used to describe all the following except. - Answer: Clean up debris only after you Go to the next job

The two main categories under which all building loads may be classified are a. dead loads and live loads b. gravity loads and lateral loads c. terrestrial loads and celestial loads d. first class and second class loads correct answers b. gravity loads and lateral loads The loads on a floor are generally expressed in a. lb/ft^2 b. lb/ft c. lb d. lb/ft^3 e. non of the above correct answers a. lb/ft^2 The loads on a beam are generally expressed in a. lb/ft^2 b. lb/ft c. lb d. l...

Structure Home Inspector Questions and Answers 100% Pass What is the primary purpose of footing in construction? Footings provide a stable base for a building's foundation, distributing the load to prevent settling. What type of foundation is typically used in areas with high water tables? A raised or pier foundation is often used to avoid water damage. How do solid masonry walls contribute to a building's structure? They provide strength and stability, resisting lateral fo...