Millwright 1 - Study guides, Class notes & Summaries

CLC 056 exam Analyzing Contract Costs Exam (contains 55 questions) • Here is your test result.The dots represent the choices you have made. • The highlighted questions are the questions you have missed. • Remediation Accessed shows whether you accessed those links.'N' represents links not visited and 'Y' represents visited links. The offeror customarily treats similar costs as “other direct costs” under similar circumstances The proposed cost benefits only the proposed contract work Th...

Millwright Level 1 Final Questions and Answers (Graded A) Millwright Level 1 Final Questions and Answers (Graded A) Millwright Level 1 Final Questions and Answers (Graded A) On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER-1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER-aluminum oxide A blotter is used on a grinding wheel to: - ANSWER-protect the flanges from the abrasiz...

Millwright Exam 1 100 Questions and Answers 2023 with complete solution

On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER aluminum oxide A blotter is used on a grinding wheel to: - ANSWER protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at least be: - ANSWER 1/3 the diameter of the wheel The best wheel...

Millwright Test

Millwright 1 Exam Questions With Verified Answers What are the 2 classes of hydraulics? Hydrostatic & Hydrodynamic What causes pressure drop in a hydraulic line? Excessive Fluid Velocity What causes aeration in a hydraulic pump? Air in the suction line What type of hydraulic cylinder is indicated in the circuit in Figure 1? Adjustable cushion on extend only What is Figure 2? Pilot Operated check valve with a 5:1 line to pilot pressure ratio What valve is internally piloted from the o...

Millwright 1 Exam Questions With Verified Answers What are the 2 classes of hydraulics? Hydrostatic & Hydrodynamic What causes pressure drop in a hydraulic line? Excessive Fluid Velocity What causes aeration in a hydraulic pump? Air in the suction line What type of hydraulic cylinder is indicated in the circuit in Figure 1? Adjustable cushion on extend only What is Figure 2? Pilot Operated check valve with a 5:1 line to pilot pressure ratio What valve is internally piloted from the o...

Millwright Test

What is the correct level of lubrication in an oil bath for an anti-friction bearing? - ANSWER 1/3 of Lowest rolling element The constant level bottle ( Drop feed ) oiler must be installed on the proper side Of the bearing housing, why is this - ANSWER Putting it on the wrong side will draw in oil and fill the housing. List the three types of nozzles used in oil mist lubrication and their applications - ANSWER Spray fitting, Condensing fitting, mist fitting On Block lubrication systems ...

The amount of power that a belt drive can transmit is directly related to the _________ of the belt on the pulley A. Tension B. Friction C. Grip D. Angle - ANSWERSC. Grip The grip of the belt on the pulley depends on A. Area, materials, tension B. Area, tension, angle C. Angle, materials, tension D. Angle, tension, materials - ANSWERSA. Area of contact Materials of belt and pulley Tension The area of contact between the belt and pulley surfaces depends on the belt width and ...