Galvanized steel flashing Study guides, Revision notes & Summaries

Buckling in a horizontal vinyl siding is generally caused by A. reflected light B. improper fastening C. condensation in the walls D. improper house wrap B. improper fastening At what level would water pressure within a single-family dwelling begin to be considered excessive and require correction? A. 60 psi B. 80 psi C. 100 psi D. 120 psi B. 80 psi A newer home with electric heat is being inspected. It has a below grade finished basement containing a bedroom. The inspect...

A poured concrete retaining wall with weep holes is rotating. What is most likely reason for rotating. A. The wall has no deadman anchor B. The footing has no reinforcing steel C. There is no gravel behind the wall D. The wall is cantilevered - Answer- C A poured concrete basement wall has a 1/4 inch wide crack where the wall is bowing slightly. Brown stains are below the crack. What is the most likely reason for this condition. A.The gutters are blocked B.the wall contains 5/8 in...

HOME INSPECTOR EXAM 2023/2024 LATEST (SPRING) SERIES WITH COMPLETE SOLUTIONSHOME INSPECTOR EXAM 2023/2024 LATEST (SPRING) SERIES WITH COMPLETE SOLUTIONSHOME INSPECTOR EXAM 2023/2024 LATEST (SPRING) SERIES WITH COMPLETE SOLUTIONSHOME INSPECTOR EXAM 2023/2024 LATEST (SPRING) SERIES WITH COMPLETE SOLUTIONSHOME INSPECTOR EXAM 2023/2024 LATEST (SPRING) SERIES WITH COMPLETE SOLUTIONSHOME INSPECTOR EXAM 2023/2024 LATEST (SPRING) SERIES WITH COMPLETE SOLUTIONSHOME INSPECTOR EXAM ...

Galvanized steel vent pipes used for drains, wast or vents shall _________. - Answer- be maintained at least 6 inches above grade Galvanized steel vent pipes with galvanized steel fittings shall be kept above ground at least _____. - Answer- 6 inches Which of the following combinations of vent pipes is adequate for a 4" drain? - Answer- Ten 1 1/4" Which of the following combinations of vent pipes will provide the minimum aggregate cross-sectional vent area of one 4" building drain? -...

Home Inspection Study set exam course questions with 100% correct answers 2024 Capillary tubes are part of the? - CORRECT ANSWER-evaporator coil Which is the most acceptable fastener for connecting a desk ledger to a band board? - CORRECT ANSWER-1/2 inch diameter hot-dipped galvanized steel machine bolt A sidewall extends past a roof. Hardboard siding is water damaged a few illes beyond where the roof and sidewall meet. The roof covering is asphalt strip shingles. What is the most li...

Plumbing Exam 4 Questions and Answers 2023/2024 Rated A+ Galvanized steel vent pipes used for drains, wast or vents shall _________. - ANS ️️ be maintained at least 6 inches above grade Galvanized steel vent pipes with galvanized steel fittings shall be kept above ground at least _____. - ANS ️️ 6 inches Which of the following combinations of vent pipes is adequate for a 4" drain? - ANS ️️ Ten 1 1/4" Which of the following combinations of vent pipes will provide the minimum...

MNM Exam 2- Masonry Wall Construction 2024 ACTUAL EXAM QUESTIONS WITH COMPLETE SOLUTIONS What 4 functions should a wall, skin, and enclosure perform? - ANSWER- 1) express and or embody formal design intent, the making of inhabited space, and the mediation of interior and exterior, both visually and physically. 2) structural- gravity, live/dead loads, lateral loads 3) thermal resistance- slow movement of heat energy 4) moisture resistance- water, water vapor, humidity Why is masonry cons...

MNM Exam 2- Masonry Wall Construction Exam Questions and Answers 100% Pass What 4 functions should a wall, skin, and enclosure perform? - Answer- 1) express and or embody formal design intent, the making of inhabited space, and the mediation of interior and exterior, both visually and physically. 2) structural- gravity, live/dead loads, lateral loads 3) thermal resistance- slow movement of heat energy 4) moisture resistance- water, water vapor, humidity Why is masonry construction made u...

FULL NHIE EXAM PRACTICE - Questions and Answers (Complete Solutions) Where you have found evidence of footing settlement, how can you predict whether there will be further settlement? (a) You can count the number of planes of movement. (b) You can determine the type of foundation material. (c) You cannot predict settlement from a single inspection. (d) You can determine the depth of the footing. You typically identify a Freon leak (a) As an oil stain (b) As refrigerant coming out of the Freon ...

According to the architectural sheet metal manual, what is the minimum thickness of a 4" x 6" plain rectangular copper downspout? - 16 Oz When using step or channel flashing where a tile roof area intersects a side wall, NRCA recommends extending the flashing a minimum of ______ up the wall. - 4" inch When installing EPDM waterproofing, lay the membrane on the substrate or flat surface and allow it to relax for a minimum of ______ before use - 30 minutes Which of the following is not...