Smog Check Manual - Functional Tests |Question and Answers| Graded A+

Smog Check Manual - Functional Tests |Question and Answers| Graded A+ OBD I; OBD II *Ans* The malfunction indicator light (MIL) or "Check Engine Light" shall be checked on all vehicles equipped with... KOEO *Ans* During the MIL functional test, the MIL should illuminate in this key position. KOER *Ans* During the MIL functional test, the MIL should extinguish when the key is in this position. Fail *Ans* If the MIL does not illuminate at all during the MIL functional test, what are the results of the test? Fail *Ans* If the MIL illuminates continuously during the MIL functional test, what are the results of the test? Fail *Ans* If the MIL flashes with the engine running during the MIL functional test, what are the results of the test? Using the vehicle manufacturer's procedure to complete the KOEO/KOER sequences *Ans* For vehicles with keyless ignition systems, how should the MIL functional test be completed? No *Ans* Are maintenance reminder lights part of the Smog Check inspection? 14,000 lbs *Ans* Most vehicles with a GVWR greater than this are not equipped with an OBD II system. The OBD II functional test is not performed on these vehicles *Ans* How should an inspector proceed with the OBD II functional test if a vehicle is not equipped with an OBD II system? OBD II functional test *Ans* This test evaluates and reports the status and/or results of the readiness monitors, system faults, and MIL. When prompted by the EIS or OIS *Ans* During an OBD II functional test, when should the inspector connect the DLC to the vehicle? Refer to the appropriate electronic component location manual or emission control diagnostic and repair manual *Ans* What should the inspector do if they are unable to find the DLC?