Lwr - Study guides, Class notes & Summaries

One type of common gearbox is the _________. A) right -angle drive B) bevel box C) fluid drive D) triangle drive - Answer-A) Right-angle drive Double helical gears are especially effective in applications where __________ are problems. A) shock and vibration B) different helical angles C) misalignments D) multiple gear sets - Answer-A) Shock and vibration Destructive pitting occurs on a gear on one side or the other of the _______. A) root B) whole depth C) tip D) pitch line - ...

Millwright-Installation & Levelling Exam Questions and Answers 2023 with complete solution Most installation procedures start at the machine foundation substructure because? a. the manual says so b. the foundation introduces misalignments in the equipment c. the foundation moves d. the foundation is inconsistant b. the foundation introduces misalignments in the equipment When installing on concrete, millwrights usally start their installation on? a. level ground b. tempered ground c....

Millwright Level 1 Exam Questions and Answers Latest | Graded A+. On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER aluminum oxide A blotter is used on a grinding wheel to: - ANSWER protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at l...

MILLWRIGHT TEST EXAM 2024 WITH 100% CORRECT ANSWERS If the seal was not properly aligned or there is excessive wear in some bearing or shaft______ wear tracks will be the indicator. - correct answer Unusual For removing hard to remove gasket materials found on sealing surfaces ______ is recommended. - correct answer sharpened brass putty knife Apprenticeship training is - correct answer Conducted on the job Charting alignment on a graph requires a chart that is divided into thousan...

A Babbitt bearing percentage refers to its area of contact. This is found by: a. Feeler gauges b. Plastic gauge c. Bluing d. Lead wire - Answer-c. Bluing A bearing with a "K" it denotes a tapered bearing. This is held in place by: a. Shaft collar b. A tapered adapter sleeve c. Lock nut d. Thread locker - Answer-b. A tapered adapter sleeve A type of bearing mounted face to face and back-to-back is: a. Angular contact b. Conrad c. Ball d. Pillow Block - Answer-a. An...

One type of common gearbox is the _________. A) right -angle drive B) bevel box C) fluid drive D) triangle drive - Answer- A) Right-angle drive Double helical gears are especially effective in applications where __________ are problems. A) shock and vibration B) different helical angles C) misalignments D) multiple gear sets - Answer- A) Shock and vibration Destructive pitting occurs on a gear on one side or the other of the _______. A) root B) whole depth C) tip D) pitch line ...

NCCER MILLWRIGHT PRACTICE EXAM 2 2024 unusual - correct answer If the seal was not properly aligned or there is excessive wear in some bearing or shaft,_______ wear tracks will be the indicator sharpened brass putty knife - correct answer For removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted on the job - correct answer Apprenticeship training is_______ distance - correct answer Charting alignment on a graph requires a chart that is...

Millwright Level 1-4 >> Millwright Alberta Finals Actual Exam Solved Combined Questions With Revised Correct Detailed Answers>>Latest Update>> 1. Radial brakes are classed as? - ANSWER 2. Brakes are classed as? - ANSWER Internal and external Radial and axial 3. Small Square jaw clutches must be engaged at? - ANSWER 10 rpm or less 4. The clutch with the slowest engagement time is the? - ANSWER activated clutch 5. Over running clutches...

MILLWRIGHT EXAM 1 2024 WITH 100% CORRECT ANSWERS Compared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock loads a. more b. less c. equally d. slightly more - correct answer b. less What rope is considered to be a standard wire a. Lang lay b. right regular lay c. left regular lay d. performing lay - correct answer b. right regular lay What safety factor is used for elevators? a. 30-1 b. 10-1 c. 20-1 d. 10-80 - correct answer ? Google ...

unusual If the seal was not properly aligned or there is excessive wear in some bearing or shaft,_______ wear tracks will be the indicator sharpened brass putty knife For removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted on the job Apprenticeship training is_______ distance Charting alignment on a graph requires a chart that is divided into thousandths of an inch vertically for the indicator readings and into whole inches horizontally for ...