Lwr - Study guides, Class notes & Summaries

MILLWRIGHT INTERPROVINCIAL (RED SEAL) REVIEW EXAM 3 2024 1. How is efficiency found? A) output over input B) input over output C) output times input times 100 D) output times input divided by hp - correct answer A) Output over input 2. What is the maximum capacity in kg of a heavy duty ladder? A) 136 B) 113 C) 102 D) 91 - correct answer B)113 . Worn ring grooves on an engine piston will cause: A) the rings to rock back and forth. B) combustion gases to blow by the rings ...

Millwright Level 1 Exam Questions and Answers Latest Graded A+. On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER aluminum oxide A blotter is used on a grinding wheel to: - ANSWER protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at lea...

On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - correct answer 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - correct answer aluminum oxide A blotter is used on a grinding wheel to: - correct answer protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at least be: - correct answer 1/3 the diamete...

One type of common gearbox is the _________. A) right -angle drive B) bevel box C) fluid drive D) triangle drive - correct answer A) Right-angle drive Double helical gears are especially effective in applications where __________ are problems. A) shock and vibration B) different helical angles C) misalignments D) multiple gear sets - correct answer A) Shock and vibration Destructive pitting occurs on a gear on one side or the other of the _______. A) root B) whole depth C) tip ...

What are the 2 most commonly used abrasive materials? - Answer-Aluminum oxide and silicone carbide For what purpose is the diamond dresser used? - Answer-When a very fine finish is required What is the purpose of ring test? - Answer-to check for cracks If a grinding wheel makes a ringing sound what does that mean? - Answer-wheel is not cracked What is the purpose of truing a grinding wheel? - Answer-Restores the shape of the wheel and makes the outer surface of the wheel concentric with ...

Millwright Level 1 Exam Questions With Correct Answers Latest (Graded A+) The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER aluminum oxide A blotter is used on a grinding wheel to: - ANSWER protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at least be: - ANSWER 1/3 the diameter of the wheel The best wheel to use for cleaning scale and dirt off ...

Millwright. Bearings; Questions and Answers 100% Solved Two kinds of flat bearings differ from there housings they are A. Solid end of friction B. Tight and tapered C. Scored and roller D. Solid and split Correct answer D. Solid and split **The choice of bearing tens of the load rotational speed direction of Pull and support design solid bearings and split bearings are fiction bearings You can remove bearing cups from a housing using a cup puller (inside puller) provided that? a. it ...

Millwright Level 1 Final Exam with Complete Solutions On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: Correct answer 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: Correct answer aluminum oxide A blotter is used on a grinding wheel to: Correct answer protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel

Compared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock loads a. more b. less c. equally d. slightly more - Answer-b. less What rope is considered to be a standard wire a. Lang lay b. right regular lay c. left regular lay d. performing lay - Answer-b. right regular lay What safety factor is used for elevators? a. 30-1 b. 10-1 c. 20-1 d. 10-80 - Answer-? Google What is the maximum capacity in Kg of a medium duty ladder? a. 136 b. 102 ...

A millwright is a tradesperson who build, installs, and maintains machinery. - True A millwright is a tradesperson who build, installs, and maintains machinery. - True ____________________ is the process of reducing and shaping materials using power tools. - Machining ____________________ is the process of reducing and shaping materials using power tools. - Machining Pharmaceuticals and aerospace are examples of two industries in which UBC millwrights work. - True Pharmaceuticals ...