Contractor - Study guides, Class notes & Summaries

Contractor's License Exam Questions and Answers 100% Pass Attachments to structural members The edges of lugs brackets, rivets and bolt heads attached to structural members shall be permitted to extend to within 1 inch of the surface of the fire protection Parapet construction The height of the parapet shall not be less than 30 inches above the point where the roof surface and the wall intersect. Combustible framing in fire walls Adjacent combustible members entering into a concret...

VA Contractors Advanced (Class A) Exam Graded A+

1. Roadway Worker Protection training - C. Must be renewed annually. 2. The cardinal rule of railroading is: - B. Always expect a train or equipment to move on any track in either direction at any time. 3. "Fouling" the track means being within __ feet of the field side of the nearest rail. - A. 4 4. According to the FRA, when working in the foul: - B. A person or equipment could be struck by a train or on-track equipment. 5. The following are roadway workers. - A. C...

VA CONTRACTORS LICENSE EXAM 2024 WITH 100% CORRECT ANSWERS What is the minimum distance from exposed ground for a wood framing member that is in contact with?? - correct answer 24 inches What is the maximum allowed slope for the top surface of a footing? - correct answer None Where should a drip edge be used? - correct answer Beneath the underlayment What is the minimum height for guard rails for balcony? - correct answer 36 inches What test is performed to determine the drainage ...

Contractor exam C-33 trade exam 2023 questions and answers 100% verified;(Contractors exam painting and decorating)

In built up roofs, cant strips shall extend how many inches up the vertical surface? - 5" Air entertainment should always be specified for concrete exposed to what? - Freezing and thawing In a post tensioning environment, when a two-stroke pull is required, the final pull should be pre-calculated to use no more than what percentage of the full stroke of the jack on the final pull? - 60% Tack or spot welding can reduce the strength of a bar to what percent of its original capacity? - 35...