IBC Fireproofing Exam 2023/2024 Graded A+ SI Certs Fireproofing Practice Test 1-3 2023 Fire Protection Systems Written Test 2023 Sprayed applied fire Proofing Exam AWCI Manual 12A (SFRM Practice Questions/Material) Fireproofing Inspector Exam Preparation AWCI Manual 12B Review with Complete Solutio...
[Show more]
Special inspections - ANSWER-_____ for sprayed fire resistant materials applied to floor, roof and wall assemblies and structural members shall be in accordance with Sections 1705.13.1 to 1705.13.6. Approved construction documents - ANSWER-Special inspections shall be based on the fire resistance...
Preview 1 out of 3 pages
Add to cartSpecial inspections - ANSWER-_____ for sprayed fire resistant materials applied to floor, roof and wall assemblies and structural members shall be in accordance with Sections 1705.13.1 to 1705.13.6. Approved construction documents - ANSWER-Special inspections shall be based on the fire resistance...
1x sold
What is the minimum allowable TFIFRM thickness determination? - ANSWER-80% of specified thickness How many TFIFRM thickness determinations are required for a W-shape column? - ANSWER-24 How many TFIFRM thickness readings are required for a pipe column? - ANSWER-24 Suppose you are performing...
Preview 2 out of 5 pages
Add to cartWhat is the minimum allowable TFIFRM thickness determination? - ANSWER-80% of specified thickness How many TFIFRM thickness determinations are required for a W-shape column? - ANSWER-24 How many TFIFRM thickness readings are required for a pipe column? - ANSWER-24 Suppose you are performing...
Refer to Figure 21. - Using the chart, determine the temperature range for a fire-extinguishing agent storage container with a pressure of 330 P.S.I.G. - Consider 330 P.S.I.G for both minimum and maximum pressure. - ANSWER-45 to 73°F. A carbon dioxide (CO2) hand-held fire extinguisher may be u...
Preview 1 out of 3 pages
Add to cartRefer to Figure 21. - Using the chart, determine the temperature range for a fire-extinguishing agent storage container with a pressure of 330 P.S.I.G. - Consider 330 P.S.I.G for both minimum and maximum pressure. - ANSWER-45 to 73°F. A carbon dioxide (CO2) hand-held fire extinguisher may be u...
Physical and visual test - ANSWER-Conditon of substrate Thinkness of application Density in pounds per cubic food (kg/m3) Bound strength adhesion/conhesion Condition of finshed application structure member surface condition - ANSWER-Surfaces shall be prepared accordance with approved fire res...
Preview 1 out of 2 pages
Add to cartPhysical and visual test - ANSWER-Conditon of substrate Thinkness of application Density in pounds per cubic food (kg/m3) Bound strength adhesion/conhesion Condition of finshed application structure member surface condition - ANSWER-Surfaces shall be prepared accordance with approved fire res...
Which standards/codes are included in AWCI Manual 12A? - ANSWER-ASTM E119, UL 263, ULC S101-M What are Sprayed Fire Resistive Materials according to UL? - ANSWER-UL no longer recognizes the terms cementitious or sprayed fiber to differentiate between sprayed fireproofing products. They are combin...
Preview 2 out of 6 pages
Add to cartWhich standards/codes are included in AWCI Manual 12A? - ANSWER-ASTM E119, UL 263, ULC S101-M What are Sprayed Fire Resistive Materials according to UL? - ANSWER-UL no longer recognizes the terms cementitious or sprayed fiber to differentiate between sprayed fireproofing products. They are combin...
What is the purpose of Manual 12B? - ANSWER-To provide field inspection procedures for the testing of thin-film intumescent fire resistive materials (TFIFRM) applied to structural members at thicknesses not greater than 660 mils (16.76 mm) Who should inspect the substrate conditions prior to appl...
Preview 1 out of 4 pages
Add to cartWhat is the purpose of Manual 12B? - ANSWER-To provide field inspection procedures for the testing of thin-film intumescent fire resistive materials (TFIFRM) applied to structural members at thicknesses not greater than 660 mils (16.76 mm) Who should inspect the substrate conditions prior to appl...
A permit must be pulled for a retaining wall more than ______ high - ANSWER-4' Who may revoke a permit if it was issued in error or in violation of an ordinance ? - ANSWER-The Building Official ___________ __________ can issue a notice of violation - ANSWER-Building Department Type _______...
Preview 2 out of 5 pages
Add to cartA permit must be pulled for a retaining wall more than ______ high - ANSWER-4' Who may revoke a permit if it was issued in error or in violation of an ordinance ? - ANSWER-The Building Official ___________ __________ can issue a notice of violation - ANSWER-Building Department Type _______...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller CLOUND. Stuvia facilitates payment to the seller.
No, you only buy these notes for £18.90. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
67474 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy revision notes and other study material for 14 years now