LATEST 2024/2025 CWB BUNDLED EXAMS|| DOWNLOAD TO SCORE A || ITS A FULL PACK SOLUTION!!!

1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - CORRECT ANSWER b) B...

What is the description of damage of a brittle fracture? - CORRECT ANSWER Sudden rapid fracture under stress (residual or applied) where material exhibits little or no evidence of ductility or plastic deformation What type of Steel are of primary concern with brittle fractures? - CORRECT ANSW...

What are the 5 main categories for LP indications - CORRECT ANSWER 1. Continuous Line 2. Intermittent Line 3. Rounded 4. Small Dots 5. Diffused or weak surface tension - CORRECT ANSWER property of a liquid that tends to reduce the area of the surface contact angle - CORRECT ANSWER ...

True or False? Creating a safe working environment is strictly the responsibility of the employer? - CORRECT ANSWER False, it the the joint responsibility of the employer and employee. WHMIS stands for: a) Workers Health Monitoring System b) Workplace Hazardous Materials Information Sy...

A Plasma is: A) A gas made up of positive ions and free electrons B) A liquid used to reduce adherence of spatter C) The main component in an inverter power source D) Always present in an electrical circuit - CORRECT ANSWER A) A gas made up of positive ions and free electrons To increas...

Where do transverse cracks occur? (a) weld metal and base metal (b) weld metal only (c) base metal only (d) weld craters - CORRECT ANSWER (a) weld metal and base metal Porosity may occur: (a) open to the surface of the weld only (b) in the heat-affected zone only (c) below the sur...

To ensure that calipers are accurate you would a) use a vernier b) calibrate them c) always take a reading to three decimal places - CORRECT ANSWER b) calibrate them 2. True or False? "Systematic errors can always be avoided by using a sufficiently precise measuring instrument." - ...

The AWS D1.1 Structural Welding Code-Steel - CORRECT ANSWER includes welding procedure and performance qualification requirements The CSA is one organization accredited by the Standards Council of Canada for developing standards related to joining and inspection. Name another one. - CORRECT...

True or False? "Electric current is readily conducted in metal (low resistance) because of the many free electrons" - CORRECT ANSWER True True or False? "Conventional current flow is from negative to positive." - CORRECT ANSWER False Materials that have a high resistance to c...

CSA Standard W47.1 provides the requirements that must be met and adhered to by a company seeking certification. True or False? - CORRECT ANSWER True Certification can be considered as an approval of the products fabricated by a certificated company? True or false?! - CORRECT ANSWER ...

What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat t...

1. AWS groups welding processes based primarily on ?: Mode of energy trans- fer, and the influence of capillary action in the effecting distribution of filler metals in the joint 2. AWS defines welding as?: A joining process producing coalescence of materials by heating them the the welding tempera...