WOODSHOP SAFETY EXAM PACKAGE|RATED A+

Safety instructions must be given before you are allowed to work on or operate any machine or - ANSWER tool You are not permitted to work on any equipment or machine if the ____________________ is not present - ANSWER instructor Guards and safety devices must be on all machines during - ANSWER...

Name the machine used to cut lumber parallel to the grain - ANSWER Table saw Where should the saw be before starting a cut on the radial arm saw? - ANSWER Behind the fence Where should your hands be and what should they be doing while making a crosscut on the radial arm saw? - ANSWER Your hand...

What is the margin of safety? - ANSWER 4 inches. When using a saw, never... - ANSWER Feed the material faster than the saw blade can remove the wood easily. The palm sander is used for what? - ANSWER removing small amounts of material slowly. All small work should be secured with what? - AN...

List the six things one should note about one self upon working in the wood shop. - ANSWER -shoes -goggles -tight clothing -mindset -jewelry -hair tied back How do you anticipate accidents before using machinery? - ANSWER by knowing the direction the blade/disk/bit moves. With a circular ...

Attitude - ANSWER Horseplay will not be tolerated. This is evidence of poor safety attitude. Keep your mind on your work. Respect the rights of others and their property. Clothing and Protective Equipment - ANSWER Wearing jewelry or loose clothes in the lab is dangerous. Long hair should be ti...

1) In case you receive an injury in the shop, report it at once to your _____ - ANSWER Teacher 2) If the instructor is out of the room, all power machines must be _____ - ANSWER Off 3) All "special" machine setups (re-sawing, redoing, plowing, grooving and tapering) must be checked by the in...

It is important to wear proper eye protection - ANSWER At all times,any time you are in the shop When lifting heavy objects it is important that you lift with the - ANSWER Leg muscles Checking the sharpness of any tool should be done using - ANSWER Paper or wood "HORSEPLAY" in the shop - ...

Safety instructions must be given before you are allowed to work on or operate any machine or _______ - ANSWER tool you are not permitted to work on any equipment or machine if the ______ is not present - ANSWER instructor guards and safety device must be on all machines during _____ - ANSWER ...

Safety instructions must be given before you are allowed to work on or operate any machine or ______. - ANSWER tool You are not permitted to work on any equipment or machine if the ________ is not present. - ANSWER teacher Guards and safety devices must be on all machines during ______. - ANSW...

Students must wear these at all times in the shop. - ANSWER Safety Glasses The red power buttons are only to be pressed by students in case of? - ANSWER Emergency This type of behavior is NEVER permitted in the shop. - ANSWER Messing Around Make sure all of these are in place before startin...

Router - ANSWER Used for edge profiling. Power Drill - ANSWER Used for drilling holes and setting screws. Table Saw - ANSWER Used to rip wood. Miter Saw - ANSWER Used for cross cuts and finish cuts. Band Saw - ANSWER Used for curved cuts. Scroll Saw - ANSWER Used for tight and rounded...

woven silt film - ANSWER used in silt fences, super silt fences and standard inlet protections woven monofilament - ANSWER used in temporary stone outlet and gabion outlet structures Nonwoven geotextile - ANSWER commonly used in practices like inflow and outflow protections, at grade, median c...

Minimum Standard 1 - ANSWER Stabilization permanent or temporary soil stabilization shall be applied to denuded areas within seven days after final grade is reached on any portion of the site; temporary soil stabilization shall be applied within seven days to denuded areas that may not be at fina...