Stationary Engineer Combined Sets

Stationary Engineer Local 99 Test Questions And Revised Correct Answers In a reciprocating feedwater pump, the _______________ A. water piston is larger than the steam piston B. water and steam piston are the same size C. steam piston is larger than the water piston D. steam valve has to be ...

Stationary Engineer Electric Test Questions And Correct Answers An AC circuit consists only of a pure inductance and a power source. The relationship between the voltage and the current in this circuit is that the - ANSWER : current lags the voltage The power factor of a load is equal to the...

UpStationary Grade 3 Engineering License Pre Test Questions And Correct Answers How can you loose your license? - CORRECT ANS : 1) drinking on the job 2) sleeping on the job 3) negligence 4) unsafe work 5) signing a falsified license application for someone 6) failing to renew your licens...

Engineers License Study Guide Questions And Revised Correct Answers What winding is connected to the load? - ANSWER : secondary Regulates the steam pressure? - ANSWER : Modulating pressure control When can you blow down a water wall? - ANSWER : when there is no pressure on the boiler What...

Engineer License Exam Prep Questions And Revised Correct Answers A ______ fuse is necessary for a circuit with a load of 21,000 watts and a voltage of 220 volts. A. 100 B. 150 C. 175 D. 200 A. 100 amps. Note: V = IR Therefore I = V/R 21,000 amps /220 volts = 95 amps At 0 psig, how many B...

MD Stationary Engineer Questions And Answers Gases of Combustion that cool on Contact with the boiler heating Surface before combushion is completed Cause a(n) _________ - CORRECT ANS : Formation of soot and smoke In the event of a flame failure, the programmer will______ - CORRECT ANS : Sec...

Stationary Engineer Test Set Questions And Answers How much clearance from the top of the boiler is needed for a HP boiler that produces 70000 lbs of steam? - ANSWER : 7 feet On a gas fired boiler what is the proper gas to air mixture - ANSWER : 30%-70% and in special arrangements it can ...

Stationary Engineering Pre Test Questions And Answers What are drum internals? - ANSWER : Drums internals comprise all apparatus with in a drum, including all baffles that quiet or separate the steam and water, the various devices that may be used for affecting the separation of the steam...

Stationary Engineer Vocabulary Pre Test Questions And Answers Accumulation test - CORRECT ANS : test used to establish the relieving capacity of boiler safety valves Air atomizing burner - CORRECT ANS : insidemixing fuel oil burner that uses compressed air from an air compressor for atomiz...

Stationary Engineer Electric Pre Test Questions And Answers An AC circuit consists only of a pure inductance and a power source. The relationship between the voltage and the current in this circuit is that the - ANSWER : current lags the voltage The power factor of a load is equal to the ___...

Stationary Engineer Electric Pre Test Questions And Answers An AC circuit consists only of a pure inductance and a power source. The relationship between the voltage and the current in this circuit is that the - ANSWER : current lags the voltage The power factor of a load is equal to the ___...