ABSA Exam Package Deal Questions With Verified And Updated Answers

4 A ABSA Questions With Complete Solutions 100% Verified where do we use stays on a fire-tube boiler? A) at the top of the boiler b)outside of the boiler to mounting brackets c) in the steam space of the boiler d)between the tubes - answerC vanstone flange held in place? A)screwed fittings ...

4th Class ABSA Exam Part A Practice Exam Questions With Complete Solutions Absolute pressure is: - answergauge pressure plus atmospheric pressure The motion of moving parts is _____ by friction: A: Prevented B: Improved C: controlled D: resisted E: Regulated - answerD: resisted Voltage is ...

4th Class Power Engineering Part A Exam Questions With 100% Answers Velocity (m/s) - answerChange in position / time Acceleration (m/s^2) - answerChange in velocity (m/s) / time (s) Force (Newton) - answermass (kg) x acceleration (m/s^2) , any action on a body that tends to change its size, sha...

ABSA 4A Exam Questions with 100% Correct Answers 2024/2025 Lowest boiling point of water is at? a. 3000m above the sea level b. Just below sea levelc. at 1000m above sea level d. at 101.3kPa - answera. 3000m above the sea level Efficiency of an electrostatic precipitator is: a. 75% b. 60% ...

ABSA 4B Exam Questions with 100% Correct Answers 2024/2025 - answerWarm Air Heating System Equipment In a warm air heating system the cold air return registers are located a) in exterior walls b) in interior locations c) under windows d) in floors e) in ceilings - answerB The major disadva...

ABSA 4B Exam Questions with 100% Correct Answers 2024/2025 Which of the following pump designs has a spiral casing with an increasing cross sectional area? 1. rotary pump 2. rotary gear pump 3. rotary lobe pump 4. reciprocating pump 5. volute pump - answer5. volute pump A clear line of sight...

ABSA 4TH CLASS PART A REVIEW Exam Questions with 100% Correct Answers When applying to write a Power Engineer certificate of competency examination, the candidate must: Select one: a. Undergo mandatory drug testing b. Hold the next lower class of qualification c. Pass a criminal records check ...

ABSA: 4th Class Part B - Comprehensive Exam 4 Questions with 100% Correct Answers One of the legal responsibilities of the engineer during an inspection is: Select one: a. To notify the Workers Compensation Board of the inspection b. Point out any known or suspected defects to the inspector c...

ABSA: 4th Class Part B - Comprehensive Exam 3 Questions with 100% Correct Answers Which type of oil produces higher fluid friction? Select one: a. High viscosity oil b. Low viscosity oil c. Synthetic oils d. Fixed oils - answera A counter-flow cooling tower _____________ than a crossflow co...

ABSA: 4th Class Part B - Comprehensive Exam 1 Questions with 100% Correct Answers Temporary hardness in feedwater is caused by: Select one: a. Magnesium sulphate b. Calcium carbonate c. Magnesium bicarbonate d. Sodium nitrate - answerc What is the recommended boiler water pH for wet layup? ...

ABSA: 4th Class Part B - Comprehensive Exam 5 Questions with 100% Correct Answers The groove that is cut in the top half in the lining of a shell bearing should not extend closer to the ends than: Select one: a. 1.7 cm b. 1.25 cm c. 10 mm d. 3 mm - answerb Temperature relief devices limit ...

ABSA 5th Class Questions with 100% Correct Answers Where are the return openings located regarding air distribution systems? -answerReturn air openings are located on inner walls. The minimum temperature of the water used in a hydrostatic test of a boiler cannot be less than what temperature? -...

ABSA 4B EXAM Questions with Correct Answers Internal ____ is not required for dynamic type compressors. seals lubrication pressure monitoring corrosion monitoring temperature monitoring - answerb Low pressure or high pressure are the two primary classifications of ____. centrifugal pumps s...

ABSA B1 Study Bank Questions with 100% correct Answers Packaged watertube boilers capacities range from? a. 2300 kg to 65000 kg per hour b. 500 kg to 100 mg per hour c. 15 psi to 15000 kg per hour d. 65000 to 100000 kg per hour - answerA The main advantage of the packaged boiler is its a. sm...