ACI Bundled Exams Questions and Answers 100% Verified and Updated | Graded A

ACI Aggregate Testing Technician - Level 1 - Section 2 Exam Questions and Answers Unless the procedures recommended here are carried out precisely, a ____ sample can result. - Answer-Nonrepresentative Generally speaking, small samples are most representative of the total supply. True or False? ...

aci exam practice questions and answers 100% verified and Updated 60-80*F - Answer- For normal strength concretes, what temperature range must be maintained for test cylinders during initial curing? 5 minutes - Answer- Tests for the slump and air content must be started within ____ after obtain...

ACI Certification Exam Questions and Answers 100% Pass The pressure of method of determining air content can be used on containing _____ _____ aggregate. - Answer- Relatively Dense The pressure method of determining air content cannot be used on concrete containing the following types of aggre...

ACI Test 100% Solved 2024 The total time allowed between obtaining the first and final portions of a composite sample is - Answer-15 minutes When it is necessary to wet sieve the concrete sample, wet sieving should be performed after the individual samples are remixed into a composite sample (T ...

ACI Certification Concrete Field Testing Tech Grade 1 Questions and Answers 100% Verified The end of the temperature sensing portion of the temperature measuring device is submerged a minimum of ___________ into FRESHLY mixed concrete. - Answer- 75 mm (3 in) The temperature measuring device sha...

ACI Aggregate Testing Technician - Level 1 - Section 1 Exam Questions and Answers Following are three of the four purposes for which aggregates are sampled; supply the fourth. Aggregates are sampled: a) for the acceptance or rejection of materials. b) for the control of operations at the site ...

ACI written exam questions and answers False. Relatively dense - Answer- The method of determining air content of concrete containing lightweight aggregate is the pressure method True - Answer- Is the following statement true or false? When making a test cylinder from concrete being used in cons...

ACI Field Grade 1 2024 Questions and Answers 100% Pass Four types of of equipment to be sampled from? - Answer- Paver, Continuous Mixer, Stationary, Revolving elapsed time between obtaining the first and final portion of the composite sample shall not exceed? - Answer- 15 min Start test for sl...

ACI Field Testing Tech Grade 1 Exam Questions with 100% Correct Answers What is the mallet weight for most tests? - Answer- 1.25 +- 0.5lb. What material mallet do most tests call for? - Answer- rawhide or rubber what is the minimum vibrations per minute most tests call for? - Answer- 9000 VPM W...

ACI Field Testing Technician Grade 1 Exam Questions and Answers Obtain Accurate Results - Answer- Why collecting a representative concrete sample is important The 4 types of sampling covered by ASTM C172/C172M-17 - Answer- STATIONARY MIXER, REVOLVING TRUCK/AGITATNG MIXER, PAVING MIXER, and CON...

ACI Concrete Field Technician - Grade 1 Exam Questions and Answers 2024 1. A 6 by 12 in [150 mm by 300 mm] cylinder mold can be used for concrete containing aggregate with particles not exceeding _____ in size, without the need for wet sieving the concrete. - Answer- 2 in. [50 mm] 2. According ...

ACI CONCRETE FIELD TESTING TECHNICIANS GRADE 1 (IN CANADA) EXAM QUESTIONS AND ANSWERS The standard practice describes the _____ _____ and _____ required to obtain a representative sample of fresh concrete and to assess its tractability to the structure it represents. - Answer- procedures, locati...

ACI Concrete Field Testing Technician Grade 1 Exam Questions and Answers 100% Correct Collecting a representative sample of concrete to be tested is as important as executing the test methods to obtain - Answer- accurate results This practice covers sampling from 4 types of equipment: - Answer- ...

Aci field test 1 formulas Questions and Answers Calculate yield - Answer- M/(dx27 Density(unit weight) - Answer- Mc-Mm/Vm Theoretical density - Answer- M/V Relative yield - Answer- Y/Yd

ACI Concrete Field Testing Technician- Grade I Exam Questions with Answers The temperature of concrete may be measured in a wall form. True or False - Answer- True The sensor of the temperature measuring device shall be submerged a minimum of _____ in. into the freshly mixed concrete. - Answer-...

ACI concrete field Grade 1 Exam Questions and Answers The elapsed time between obtaining the first and final portion of samples that will be used to fabricate a composite sample shall not exceed ———- - Answer- 15 minutes The individual samples shall be combined and remixed with a scope the...

ACI Concrete Field Testing Technician- Grade I Exam Questions with Answers Section 1: Temperature of Freshly Mixed Hydraulic-Cement Concrete - Answer- C1064 The end of the temperature sensing portion of the temperature measuring device is submerged a minimum of _____ into the freshly mixed concr...

ACI Concrete Field Testing Technician - Grade 1 (18) Exam Questions with Answers ASTM C1064 - Answer- Standard Test Method For Temperature of Freshly Mixed Hydraulic-Cement Concrete The end of the temperature sensing portion of the temperature measuring device shall be submerged a minimum of __...

ACI Field Grade 1 Testing Exam Questions and Answers 100% Pass It is acceptable to measure the temperature of freshly mixed concrete in the forms provide : A. The sensor of the temperature measuring device has at least 3 " of cover in all directions. B. The concrete has been properly consolid...

ACI Certification - Concrete Field Testing Technician - Grade 1 - Test Sample Written Exam Questions - CP-1(17) with 100% Correct Answers The Method of determining air content of concrete containing lightweight aggregate is the pressure method. True or False? - Answer- False When making a test...

ACI Grade 1 Field Testing Certification Practice Test Questions with Answers 100% Correct For concrete with aggregates less than 3 inches, the thermometer must remain in the fresh concrete sample a minimum of 5 minutes or until the temperature reading stabilizes. (True or False) - Answer- False ...

ACI Certification- Concrete Field Testing Technician Grade 1 CP-1 (12) Exam Questions and Answers 100% Pass ASTM C1064 - Answer- Standard Test Method For Temperature of Freshly Mixed Hydraulic-Cement Concrete The sensor of the temperature measuring device shall be submerged a minimum of ______...

ACI Concrete Field Testing Technician - Grade I Exam Questions and Answers The end of the temperature sensing portion of the temperature measuring device is submerged a minimum of __mm [__in.] into the freshly mixed concrete. - Answer- 77mm /3in. The temperature measuring device shall be capabl...

ACI Concrete Field Testing Technician Grade 1 Study Guide 2024 with 100% Correct Answers ASTM C31 / C31M-06 - Answer- Standard Practice for Making, Curing, Protecting & Transporting Test Specimens in the Field Conditions. ASTM C1064 /C1064M-05 - Answer- Standard Test Method for Temperature of F...

ACI Concrete Field Testing Technician- Grade I Exam Questions with Answers The sensor of the temperature measuring device shall be submerged a minimum of _____ in. [_____mm] into the freshly mixed concrete. - Answer- 3 in. [75 mm] The temperature measuring device shall have a capacity of measuri...

ACI Field Grade 1 Practice Test 100% Solved 2024 The temperature measuring device shall be cable of accurately measuring the temperature of freshly mixed concrete to 1°F throught a range of____________________________. - Answer- 30 - 120°F It is acceptable to measure the temperature of freshly...

ACI FIELD GRADE 1 EXAM QUESTIONS AND ANSWERS Collecting a representative sample of concrete to be tested is as important as executing the test methods to obtain. - Answer- Accurate Results This practice covers sampling from five types of equipment, which are ___________, ___________, __________,...

ACI- Concrete Field-Testing Technician - Grade 1 Exam Questions and Answers 100% Pass Q1. Start molding specimens for strength tests within 30 minutes after fabricating the composite sample. A. True B. False - Answer- B. False ASTM C172 -Para (4.1.2) - Start molding. specimens for strength t...

ACI Test 100% Correctly Solved 2024 The total time allowed between obtaining the first and final portions of a composite sample is - Answer- 15 minutes When it is necessary to wet sieve the concrete sample, wet sieving should be performed after the individual samples are remixed into a composite...