Other
General Introduction and Verification of Ohm's and Kirchhoff's Laws
- Module
- Institution
A report verifying Ohm's and Kirchhoff's Laws, including experimental procedures and results.
[Show more]
Seller
Follow
elvislws1
Content preview
General Introduction and Verification of Ohm’s andKirchhoff’s Laws
Mechanical Engineering (BEng.) Degree
MEC1151 – Electrical Circuits and Analysis
29/09/22
School of Engineering
University of Glasgow
Date of Completion: 11/10/2022
Table of Contents
,Abstract ...................................................................................................................................... 3
1. Introduction ......................................................................................................................... 3
1.1 Equipment ............................................................................................................................. 3
2. Theoretical Background ........................................................................................................ 5
2.1 Ohm’s Law ............................................................................................................................. 5
2.2 Kirchhoff’s Laws ..................................................................................................................... 5
2.21 Kirchhoff’s Current Law ........................................................................................................ 5
2.22 Kirchhoff’s Voltage Law ........................................................................................................ 6
3. Experiment Procedures ......................................................................................................... 6
3.1. Verification of Ohm’s Law...................................................................................................... 6
3.2. Verification of Kirchhoff’s Voltage Law in Series DC Circuits .................................................... 7
3.3. Verification of Kirchhoff’s Current Law in Parallel DC Circuits ................................................. 8
3.4. Verification of Kirchhoff’s Voltage and Current Laws in Series-Parallel DC Circuits ................... 9
4. Experimental Results and Analysis ...................................................................................... 10
5. Discussion .......................................................................................................................... 19
5.1 Experimental Discussion ....................................................................................................... 19
5.2 Experimental Questions ....................................................................................................... 20
6. Conclusion.......................................................................................................................... 24
7. References ................................................................................................................................................... 25
, Abstract
The main aim of this report is to verify Ohm’s Law and Kirchhoff’s Laws by building circuits and
measuring voltages and currents. Ohm’s Law links voltage to current and resistance, whereas
Kirchhoff’s Laws deal mainly with current and voltage; Kirchhoff’s Current Law (KCL) and Kirchhoff’s
Voltage Law (KVL). The circuit was then analysed using the three basic laws, as well as a GPS-3033
(power supply) and a DMM. Through 4 different experiments, Ohm’s Law and Kirchhoff’s Laws were
found to be valid after comparing the results from each of the experiments.
1. Introduction
The purpose of this report is to provide verification of the three laws by conducting 4 different
experiments in both series and parallel circuits using a breadboard with jumper wires, a power
supply, a DMM, and resistors with varying resistance.
1.1 Equipment
Breadboard
The breadboard is used for building temporary circuits. The breadboard consists of two terminal
strips and two bus strips as shown in Figure 1. Each bus strip has two columns of contacts. Each of
the two columns of contacts are a node.
Figure 1: An example of a breadboard
Power Supply
For the experiments, we will be using a GPS-3033 from GW INSTEK which provides independent
voltage range of 0 to 30V and independent current range of 0 to 3A.
Figure 2: GW INSTEK GPS-3033 power supply
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller elvislws1. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £12.64. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
77254 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy revision notes and other study material for 14 years now