Which area do truck cranes without a 5th outrigger generally have no lifting capacity unless the manufacturer states otherwise? - Answer The front
What is the definition of "operating radius?" - Answer The distance from the center of rotation of the crane to the center of gravity of the load...
NCCCO Final Test questions with correct
answers
Which area do truck cranes without a 5th outrigger generally have no lifting capacity unless the manufacturer states otherwise? - Answer The front
What is the definition of "operating radius?" - Answer The distance from the center of rotation of the crane to the center of gravity of the load
What applies to the capacities below the bold line shown on a load chart? - Answer
They are based on the stability of the crane
In which quadrant are rough terrain crane capacities generally greater? - Answer Over the front
What percentage do most manufacturers requires a crane's load chart capacity to be
reduced by for duty cycle operations - such as high-volume concrete placement? - Answer 20%
From which two points should the boom be measured? - Answer From the boom hinge pins, to the center of the boom tip sheave
What is the preferred method of installing wire rope from a reel onto a hoist drum?
- Answer Running the rope from the top of the reel, to the top of the drum.
Over which quadrant are truck crane capacities usually greater? - Answer Over the rear According to OSHA, which accessible area of an operating crane must always be barricaded? - Answer The swing radius of the rear of the rotating superstructure
What is the OSHA regulation governing cranes in construction? - Answer 1926.1400
According to ASME, what percentage of the manufacturer's crane rating must not be exceeded if a load test is done on a repaired crane? - Answer 100%
Where is the tipping axis of a crawler crane located? - Answer It depends if the idler or sprocket are in line or offset from the track rollers
What should be done with materials placed under overhead energized power lines?
- Answer NOT be lifted by crane
What determines the amount of deduction required for an erected jib that is not being used? - Answer The effective weight of the jib
What happens to ground bearing pressure if you move a crawler crane from soft ground to harder ground? - Answer It increases
How should the wheels of a crane be positioned when it is set up for working on outriggers? - Answer Just high enough off the ground to relieve the tires of crane weight
Where is the tipping axis of a crawler crane located? - Answer It depends if the idler or sprocket are in line or offset from the track rollers
Where are the Standard Method hand signals found? - Answer OSHA Subpart CC
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller cracker. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £10.36. You're not tied to anything after your purchase.
