Exam (elaborations)
TATTOO EXAM/395 QUESTIONS AND ANSWERS (A+)
- Module
- TATTOO EXAM
- Institution
- TATTOO EXAM
TATTOO EXAM/395 QUESTIONS AND ANSWERS (A+)
[Show more]
Content preview
TATTOO EXAM/395 QUESTIONSAND ANSWERS (A+)
When the armature bar is flat on the front coil, what is
the smallest gap above the rear coil? - √Answer :.010
Quiz :What does a smaller gap above the rear coil
cause? - √Answer :More power
Quiz :What should the armature bars be made of? -
√Answer :Plain steel
Quiz :How does a machine run if too much of the coil is
showing? - √Answer :Hot
Quiz :What type of edges should your contact screw
have? - √Answer :Rounded and smooth
Quiz :Where on the front spring should the contact
screw be hitting? - √Answer :Front and end of spring
Quiz :What length of spring would run faster? - √Answer
:Short spring with high angle
Quiz :What type of metal should the contact screw be
made of to have the highest conductivity? -
√Answer :Brass
Quiz :How does the armature bar hit the front coil core?
- √Answer :Flat, full contact
Quiz :What do you want the frame on your tattoo
machine to be? - √Answer :Non-conductive
,Quiz :What happens when your machine is conductive
and electrified? - √Answer :The armature bar sticks to
the coils causing the matching to stay in an "on" setting
Quiz :What diameter should your post binding be? -
√Answer :5/16
Quiz :What happens if you use a steel contact screw? -
√Answer :Can cause unwanted spark
Quiz :When setting up your machine, why would you
"snug" down the eye of the needle bar? - √Answer :This
helps to prevent weak and jumpy lines
Quiz :Why is a once-piece contact screw the best
choice? - √Answer :Screws with things added on top
can cause vibration
Quiz :What are the two advantages of to using a brass
contact screw? - √Answer :100% conductive and keeps
its shape longer than other choices
Quiz :How much if the contact screw should be touching
the front spring? - √Answer :A tiny contact area
Quiz :Why should you use plain steel for a spring rather
than a coated spring? - √Answer :The coating wears
away quickly, which causes a bad connection
Quiz :What kind of reaction can you expect from a
machine with a very low spring angle? -
√Answer :Spongy and weak
,Quiz :Which type of machine benefits the best from a
shorter spring? - √Answer :A liner
Quiz :Which spring is the most important for tuning the
machine? - √Answer :The rear spring
Quiz :A machine that is very hard hitting and fast
running moves the needle in and out of the skin so fast
that _____? - √Answer :It doesn't leave enough pigment
behind
Quiz :What is the ideal width of the springs used on the
machine? - √Answer :The springs should be just as
wide as the part they're attached to
Quiz :What types of screws should you use to hold the
coils to the frame? - √Answer :Always use a magnetic
screw that sits flush to the frame
Quiz :What is the function of the tube vise? -
√Answer :Firmly hold the tube in place and properly
align the tube while the machine is in use
Quiz :How should a tube vise hold a tube in comparison
to the machine? - √Answer :Squarely front to back and
side to side
Quiz :What is the most important part of a tattoo
machine? - √Answer :Coils
, Quiz :What is the purpose of the coils of a tattoo
machine? - √Answer :To run consistently and not lose
power
Quiz :What is a possible reason for the machine to not
work at all? - √Answer :There is debris between the
contact screw and the front spring
Quiz :What can cause the coils to be in a constant "on"
position? - √Answer :A coil wire, soldering lug, or any of
the electrical circuit touching the frame
Quiz :What does your frame act as for a coil circuit? -
√Answer :The ground
Quiz :What is not a purpose of the binding posts? -
√Answer :Electrical contact from the soldering lugs to
the contact screw
Quiz :What is a safety feature of the cartridge needles?
- √Answer :If the cartridge is not installed in the machine
or tube, then the needles are not exposed; this limits the
possibility of needle stick
Quiz :What does EPA stand for? -
√Answer :Environmental Protection Agency
Quiz :What does FDA stand for? - √Answer :Food and
Drug Administration
Quiz :What does "high level disinfectant" mean? -
√Answer :A chemical agent, registered with the EPA,
which has demonstrated tuberculocidal activity
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller HELLENAH. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £8.28. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
80630 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy revision notes and other study material for 14 years now