ASD Practice Tests Questions With Complete Solutions
17 views 1 purchase
Module
ASD
Institution
ASD
Category 1 - Category of Water that originates from sanitary water source (Clean)
Catetroy 2 - Category of Water that is contaminated; may cause discomfort or sickness (Grey)
Category 3 - Category of Water that is grossly contaminated; includes toxins, pathogens
Special Situation - Regulat...
1 per 10-16 linear ft. of wall area; 15-45 degree focus; almost
touching wall. - Placement of Airmovers
Structural Cavity Drying Systems - (SCDS)
vented (turbovents 18" - 48" widths' Octidry; Air Wolf
injected (Injectidry; Dri-Force; Direct-it In)
Floor Drying System - vented (Air Wolf)
Injected - negative air mats (Dri-Force; Injectidry)
Air Filtration Devices - AFDs (negative air machines; air
scrubbers; HEPA filters)
AHAM Rating - On dehumidification equipment it is the pints
removed at 80 degrees and 60% humidity in 24 hours.
,Standard Refrigerant - Temperature - 68 degress
Relative Humidity - 60%
Specific Humidity (gpp) - 55-60
Conventional - Temperature - 33 degrees
Relative Humidity - 40%
Specific Humidity (gpp) - 55-60
Low Grain Refrigerant (LGR) - Temperature - 40 degrees
Relative Humidity - 30%
Specific Humidity (gpp) - 28-35
Desiccant - Temperature - 32 degrees
Relative Humidity - 10% - below
Specific Humidity (gpp) - 10-15 - below
Refrigerants - Dehumidifiers that are most efficient operating
conditions 70-90 degrees (most energy efficient)
Desiccants - Dehumidifiers that are most efficient with incoming
air from coolest/driest air possible; capable of creating pressure
differentials; produces low specific humidity required to dry
Class 4 materials.
Conventional - Initial Dehumidification Calculations
Class 1 = 100
Class 2 = 40
Class 3 = 30
Class 4 = N/A
, LGR - Initial Dehumidification Calculations
Class 1 = 100
Class 2 = 50
Class 3 = 40
Class 4 = 50
Desiccant - Initial Dehumidification Calculations
Class 1 = 1 ACH
Class 2 = 2 ACH
Class 3 = 3 ACH
Class 4 = 2 ACH
Amperes (amperage or amps) - The amount of electricity
(current) flowing in a circuit
Voltage - The force of electricity flow in a circuit
Watts - The amount of electricity an electrical devices uses
when operating
BTUs (British Thermal Units) - Heat generated by electrical
device.
amps x volts x 3.4 - BTUs per hour formula
12,000 - HVAC removes _________ BTUs per ton.
15 - Residental is generally ___ amp
20 - Commerical is generally ___ amp
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Classroom. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £10.60. You're not tied to anything after your purchase.
