Advanced rigging test 2 – 64 Exam
Questions and Answers
1) What is meant by the term "two blocking - -The load block contacts the
boom point sheaves.
-2) lifting 20,000lbs, with a 2-leg bridle sling at a 30 horizontal sling angle,
what is force applied to each leg? - -20,000
-3) In multiple crane lifts using an equalizer beam, the weight of the beam
should be considered: - -Part of the load weight
-4) What is required if there is a deviation in the lift plan? - -A new lift plan
-5) On level ground using skids and rollers, what percent of the weight of the
load should yield the required line pull as a general rule of thumb? - -5%
-6) All of the following are results of unbalanced reeving of the hook block
EXCEPT: - -Wear on the hook
-7) Before a spreader bar or beams can be used they MUST have been: - -
Tested and approved
-8) When materials are being hoisted to an upper level, a tag line is used to:
- -Help control the load
-9) Two cranes are lifting 100 tons . If crane A has 40 % of the load , how
much weight will crane B have on its hook? - -120,000 Ibs.
-10) To confirm the rated capacity of a specific sling, consult the
manufacturer's: - -Sling tag
-11) OSHA regulations require hook replacement if the opening exceeds
what percentage of its original throat opening? - -15%
-12) At what percentage of increase in length should a chain sling be
removed from service? - -5%
-13) The methodical process that attempts to identify hazards and devise
plans to overcome or eliminate hazards which may interfere with crane or
rigging is called: - -Lift plan
-14) What provides additional control of a load being lifted? - -Tag lines
, -15) When traveling on a rubber tire mobile crane, how should the boom be
positioned? - -In line with the direction of travel
-16) Before performing pick and carry operations with any mobile crane, it is
important to: - -Refer to the manufacturer's capacity chart
-17 ) According to ASME B30.5 , a two crane lift is signaled by - -One
designated person
-18) How much force would be required to move an object up an inclined
plane compared to lifting it vertically? - -Less force
-20) All of the following are reasons for stopping personnel lifting operations
EXCEPT - -There are no tag lines
-22) The point of any object's weight can be assumed to be concentrated at:
- -Center of gravity
-23) In a spur-gear chain hoist with a two chain system, the endless chain is
used to - -Raise and lower the load
-24) In an emergency situation, what is the rigger's FIRST priority? - -To
prevent injury or loss of life
-25) All of the following conditions exert dynamic loading on a crane
EXCEPT: - -Static boom angle
-26) Proper lead sheave placement as it relates to the hoisting drum location
is: - -Proper spooling of wire rope
-27) The most important information to consider when planning a lift is: - -
weight of the load
-28) Prior to use, all new, altered, modified, or repaired rigging hardware
shall be inspected by whom? - -designated person
-29) An unsafe condition that riggers should be aware of when dealing with
a multi part load block is: - -Twisting multi part lines
-31) The only personnel allowed to have their body parts outside of the
suspended personnel platform during hoisting and lowering operations are: -
-Signal persons
-32) What is the most important reason rigging hardware should NOT be
modified? - -It could negatively affect its capacity
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Victorious23. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £6.93. You're not tied to anything after your purchase.