Electricity, Principles
and Applications
9th Edition by Richard Fowler
Complete Chapter Solutions Manual
are included (Ch 1 to 16)
** Immediate Download
** Swift Response
** All Chapters included
, Instructor Resources
• Parts and Equipment List
• Learning Outcomes
• Answers to Student Textbook Questions
o Chapter Review Questions and Problems
o Critical Thinking Questions
o Homework Problems
• Answers to Experiments Manual
1
, Section
1
Parts and Equipment List
Materials such as lamps, resistors, insulating RESISTORS
tape, plastics, wood, and switches are required as
specified for various projects. These materials are Qty. Qty.
consumable; quantities depend on the number
and type of projects assigned. 1 2 Ω, 10 W, ±10% 1 22 Ω, 1 W, ±10%
Miscellaneous materials, such as hook-up 1 2.2 Ω, ½ W, ±5% 1 25 Ω, 12 W, ±10%
wire, nails, magnets, ferrite rods, and paper, are 1 4.7 Ω, ½ W, ±5% 1 33 Ω, ½ W, ±5%
required throughout the Experiments Manual. 1 6 Ω, 50 W % (Dale 1 47 Ω, ½ W, ±5%
Such materials are nonconsumable and can be RH-50) 1 51 Ω, ½ W, ±5%
used repeatedly. 1 10 Ω, ½ W, ±5% 2 100 Ω, ½ W, ±5%
1 22 Ω, ½ W, ±5% 1 220 Ω, ½ W,
INSTRUMENTS 1 220 Ω, ½ W, ±10% ±5%
1 470 Ω, ½ W, ±5% 1 20 kΩ, ½ W, ±1%
Qty. Qty. 1 470 Ω, ½ W, ±10% 1 20 kΩ, ½ W, ±5%
2 1000 Ω, ½ W, ±5% 2 200 kΩ, ½ W, ±5%
1 DMM and/or VOM 2 wattmeters, 1000 W, 1 1000 Ω, ½ W, ±10% 1 470 kΩ, ½ W, ± 10%
1 multimeter, l0-MΩ 300 V, 7 A 1 1000 Ω, 1 W, ±2% 2 10 MΩ, ½ W, ±5%
input resistance* 1 oscilloscope with 1 1000 Ω, 1 W, ±5% 1 potentiometer, 0
1 ammeter, ac, 5 mA, external trigger 1 2200 Ω, ½ W, ±10% to 10
±3%* 1 signal generator, 1 4700 Ω, ½ W, ±5% kΩ, 2 W, ±5%, linear
1 ammeter, ac, 300 or 20-Hz to 150-kHz 1 4700 Ω, ½ W, ±10% 1 potentiometer, 0
500 mA* range, 2 10 kΩ, ½ W, ±5% to 10
1 ammeter, ac, 10 A* 5-V sinusoidal output 1 10 kΩ, ½ W, ±2% Ω, ½ W, ±10%, linear
1 voltmeter, dc Multisim
panel, 5 V, 1000
Ω/V CAPACITORS
POWER SUPPLIES Qty. Qty.
Qty. 1 1000 pF, 100 WV dc, 0.47 µF, 100 WV dc,
±10% ±10%
1 power supply, 1 1500 pF, 100 WV dc, 1 1 µF, 100 WV dc,
variable, 0 to 20 V dc assorted dry cells, ±10% ±10%
1 power supply, 6 to 1.5 V and 6 V 1 0.005 µF, 100 WV 2 1000 µF, 50
8 V dc, 2 A (rectified dc, ±10% WV dc,
output of a 6-V 1 0.01 µF, 100 WV dc, electrolytic
transformer will do) ±10%
2
, *These meters are not needed if the DMM and/or VOM has the
appropriate ac ranges.
Parts and equipment list continued on the next page.
MISCELLANEOUS
Qty. Qty.
2 switches, SPDT, 1 A, 3 fuses, 0.5 A, with
125 V holders
1 switch, SPST, 1 A, 1 loudspeaker, 8 Ω
125 V 2 chokes, 2.5 mH,
3 lamps, 150 W, 120 V, >100 mA, <40 Ω
incandescent, with (J.W. Miller 6302 or
lamp holders similar)
4 lamps, miniature 1 choke, 0.5 H,
no. 47 (6.3 V, 0.15 A), 300 mA dc, 30-Ω dc
with holders resistance (Triad
3 lamp, neon, NE-2 C36X or equivalent)
1 LED, T 1 3/4 1 zener diode, 8.2 V,
3 transformers, dual 500 mW
115-V primary; dual 1 transistor, 2N4126
6-V, 2-A secondary 1 zener diode, 14 V,
(Magnetek/Triad 1 W, ±5%
F-106Z, Stancor 1 motor, capacitor-
P-6376, or start, ⅓- or ½-hp,
equivalent) 1725-rpm, 115-V,
1 transformer, reversible
variable, 0 to 120 V, 1 motor, split-phase,
7A ⅓- or ½-hp,
1 soft grease pencil 1725-rpm, 115-V,
1 heater or hair dryer, reversible
500 W, 120 V
3
