100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Boilermaker NCCR Test Questions with Explanations of Answers | latest upate 2024 £6.34   Add to cart

Exam (elaborations)

Boilermaker NCCR Test Questions with Explanations of Answers | latest upate 2024

 5 views  0 purchase

Boilermaker NCCR Test Questions with Explanations of Answers | latest upate 2024

Preview 2 out of 10  pages

  • June 17, 2024
  • 10
  • 2023/2024
  • Exam (elaborations)
  • Questions & answers
All documents for this subject (107)
avatar-seller
ACTUALSTUDY
Boilermaker NCCR Test
When are steel chain slings recommended? - ANS-When rigging from three points

A big control valve is pulled who is responsible for the rigging? - ANS-Crane operator and rigger

What should be used to hold the pipe when setting up two 40-foot joints of 16-inch STD WT
pipe? - ANS-4 legged roller top jacks

The hitch made by wrapping the sling around the load, then passing one eye of the sling
throughout a shackle is called? - ANS-Choker Hitch

When should rigging material be attached to a bean that is being demolished? - ANS-Before
any bolts are removed or any cutting is done on the beam.

Which of the following has a greater possibility of being a respiratory hazard? - ANS-Asbestos

Which type of insulation is required before a vessel is entered? - ANS-Locking, Tagging, and
Blinding lines that feed the vessel

According to OSHA, oxygen and acetylene cylinders in storage must be separated at what
minimum distance? - ANS-20 Ft

What is the first thing a boilermaker should do before cutting into a tank or vessel? -
ANS-Determine the content

What tool is normally used to check the alignment on the horizontal seams of the shell plates? -
ANS-A 2-foot level

What is used to expand tubes inside mud and steam drums? - ANS-Rolling motors and
espanders

What does a grooved nut on an Acetylene rig indicate? - ANS-The left hand thread is for
acetylene use only

Thermal beveling of pipe in preparation for welding requires use of an? - ANS-Oxyfuel Torch

A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting rig not be adjusted
over 15 PSI? - ANS-Acetylene is unstable above this pressure

What action should be taken if a boiler tube fails? - ANS-Replace the failed tube

Before a wall burner is pulled for inspection - ANS-The fuel gas valve must be shut

, Which of the following is a type of insulation used inside furnaces? - ANS-Fire Brick

What does "MTW" mean in reference to boiler tubing? - ANS-Minimum Wall Thickness

On a drawing, what is used to record any changes to the drawing? - ANS-Revision Block

Scales on a drawing are usually written in - ANS-inches and feet

Dimensional measurements can be found on all of the following except - ANS-Mechanical flow
diagram

All vessels elevations are taken from the - ANS-top of steel on the embed ring (base plate)

A gate valve is being removed from a product line. All of the following procedures must be
performed except? - ANS-Valve must be in closed position

What is a spud wrench most commonly used for? - ANS-Aligning flanges

What type of valves are typically used on a sight glass to direct flow? - ANS-3 way valves

Handhole cap and plug material is verified by the - ANS-P4 report

What are the four major components of a gate valve? - ANS-Body, Bonnet, gate, and stem

What is the most commonly used fasteners in boiler construction? - ANS-Threaded

On site, who determines what grade of material to be used for repair? - ANS-QA/QC

What is the best tool to be used to prepare XXH 2-inch tubing for welding? - ANS-Milling Motor

All of the following tools are used in preparation of the butt weld of a tube except? -
ANS-Chipping Gun

What preparation must be made for the Spring-Can hangers of a section of a pipe before hydro
testing can be - ANS-No preparations must be made

Which of the following connecting units are used on pipe hangers? - ANS-Eye Bolts,
Turnbuckles, Threaded Rods

Which of the following materials may be used to safely secure scaffold boards to a platform? -
ANS-#9 Tie wire

For high temperature service, one end of a stud should be? - ANS-Marked B16

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller ACTUALSTUDY. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for £6.34. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

82871 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy revision notes and other study material for 14 years now

Start selling
£6.34
  • (0)
  Add to cart