Exam (elaborations)
G2 Gas Technician Module 19 Revised
G2 Gas Technician Module 19 Revised
[Show more]
Seller
Follow
Content preview
G2 Gas Technician Module 19 RevisedIf the venting on a high efficiency furnace runs through unheated spaces, what must be
done? - ANS-Insulate piping to prevent Condensation and freezing
What is condensate drain piping used for? - ANS-Dispose Liquid waste
Once the furnace is installed, what are the gas technician's responsibilities to the user?
- ANS-To instruct the the user in the safe and correct operation of all appliances and
equipment - clause 4.3.2
Which furnace type is the most popular? - ANS-High boy Up Flow
What type of furnace is used in areas of limited head room? - ANS-Horizontal Forced
Air
What is the AFUE rating of a typical medium efficiency furnace? - ANS-78% - 82%
Which category of furnace is standard atmospheric appliance? - ANS-Category 1
Is a fan necessary to move the flue gases through a gravity vent? Why? - ANS-No, hot
air rises.
Are high-efficiency furnaces power vented? - ANS-Yes
Which Vent is the most heat resistant? - ANS-Type A
On a forced draft burner, where is the fan located? - ANS-Upstream from the
combustion chamber.
What is the disadvantage of oversizing a furnace? - ANS-Inefficiency
How is the delivered air volume adjusted if a belt-drive fan motor is being used? -
ANS-Adjusting the pulleys of the motor
Must all defective heat exchangers be replaced immediately? - ANS-Yes
A high efficiency furnace incorporates how many heat exchangers? - ANS-Two
, On a furnace with no filter rack, what should be done? - ANS-Rack should be built on
return duct connection
What is a plenum? - ANS-Duct work system connected directly to the furnace
What should be done if a customer shows signs of Co poisoning? - ANS-Evacuate,
Shut off appliance, Call TSSA
Once a fan motor has been cleaned what are the next two steps? - ANS-Check
electrical wire for tighteness and clean the blower components
How is temperature rise determined? - ANS-Placing thermometer in the return and
supply plenums while the furnace is running
What tool should be used to clean the outside of the heat exchanger? - ANS-Soft Brush
How many heat exchangers do Natural Draft Furnace have? - ANS-One
How is Delta Temperature measured? and what should it match? - ANS-Supply Air
minus Return Air, It must not be less or more than Manufacturers Rating Plate
In a high efficiency furnace, which heat exchanger does the Supply air pass through
first? - ANS-The Secondary
What proves that your Induce blower is functional? - ANS-The pressure switch
How is Hot Surface Igniter diagnosed? - ANS-Connect leads to both wires, check for
voltage and Resistance
How is a belt motor in a furnace maintained? - ANS-Must be Oiled and Alignment
Where is the Automatic Damper located? - ANS-Down stream of the draft hood
What purpose does a Automatic damper serve? How does it work? - ANS-Reduce heat
loss up the chimney and it opens when burners fire and closes during the off cycle
What is Static Pressure in a furnace?, how is it measured?, and what standard must it
meet? - ANS-The pressure in the furnace at 90 degrees. It's measured with a
manometer It must meet Manufacturers Rating plate standard
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller modockochieng06. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £6.18. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
73091 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy revision notes and other study material for 14 years now