CETP 5.1 Designing & Installing
Dispenser Transfer Systems
_____________ in electrical area classifications are based upon the likelihood of the
prescence of a flammable mixture of materials in an area. - correct answer-Divisions
______________ are designed to remian in place and minimize any entrance of
water or other matter into the relieve valve or discharge piping. - correct answer-Rain
caps
__________________ scales are most frequently selected for their simplicity and
durability. - correct answer-Single-beam style
_____________________ is the difference between the pressure at the outlet side
of the pump, and the pressure at the inlet side of the pump. - correct
answer-Differential pressure
_________________________ are suitable for typical dispenser isntalls and will
provide adequate transfer volume for filling portable cylinders, motor fuel cylinders,
and vehicle mounted ASME tanks mobile/fuel tanks. - correct answer-Regenerative
turbine pumps
A ______________ or a differential back pressure valve shall be installed in or on
the dispenser at the point which the dispenser hose is connected to the liquid piping.
- correct answer-excess flow check valve
, A dispenser install ________________ and discuss with the _______________ is
the first step in designing/installing the dispenser. - correct answer-Site inspection,
dispenser operator
A liquid meter will over register any time there is vapor in the __________. - correct
answer-measuring chamber
A remote emergency shutoff device is required not less than __ ft, but no more than
____ ft from transfer point. - correct answer-3, 100
According to NFPA 58propane dispensers must be seperated from other fuel
dispensing stations by at least __________. - correct answer-10 feet
An ASME container 1200 gallons WC or less must be at least __ ft from any other
LP-gas container of more than 125 gallons WC. - correct answer-25
An ASME tank's _______________ is used to determine the the discharge capacity
requirements for it's relief valve. Appears on tank data plate. - correct
answer-surface area in square feet
ASME tanks larger than 1,200 gallons WC must be fitted with a ________________
and a ________________. - correct answer-pressure gauge, temperature gauge
Buried metalic propane piping should be coated or protected and maintained to
_____________. - correct answer-minimize corrosion
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Hkane. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £6.46. You're not tied to anything after your purchase.
